• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

The Celestion Owners Thread

Finished getting the Sl12si back together and working again. The cabinets were in bad shape with plenty of marks and missing veneer around the edges. I sanded them down to bare wood and thought about putting on new veneer, but I just went ahead and stained and finished them after fixing the worst damage. I went with a walnut stain as both the wife and I disliked the orange tone the original finish turned over time. Before and after below.


I installed replacement tweeter and a mid woofer and took out the crossovers and binding posts. I was going to recap the crossovers but decided to give them a listen first. The binding posts were very tarnished and black and green in colour. Soaked them overnight in vinegar and salt bath and they came out looking new.

I hooked them up and gave them a listen and I am so happy with how they sound. The awesome highs and mids are as I remember, and I am listening to lots of great music again. I have them hooked up to my home theatre receiver a Denon 3808ci. I am getting my Denon PMA-1520 amp repaired and will setup a 2 channel for dedicated music enjoyment. Glad to see this speakers saved and back up and running again.

 
Hi @jmacd27

Now this is a stunning amazing restoration work you did with these beauties. Wooooo that wood work you did is simply amazing, Great job & kudos. Now I need to find a pair like this to hear how they sound ;-)
 
... Apart from owning many IMF products I also have quite a few Celestion SL Speakers which I'm quite fond of. Mine are all from the SL6 range but am still looking for a set of the Holy Grails which are the SL12Si, these are the larger version of the SL6 using two Mid Bass drivers...
The SL12Si are pretty nice sounding speakers. Interesting is the difference between the SL6Si and the SL12Si is that the SL12Si has a higher (+2dB) sensitivity and higher low frequency -3dB rolloff.

One of my SL12Si in my music system:
Celestion SL12Si.JPG
 
Anyone know which model celestion aluminum dome 34 mm tweeters were used in the rogers studio 1a? Looking for one for a replacement. Thank you.
 
Hey guys!

I would like to know for those of you who have owned Celestion Ditton 66 MKII, what would be the best Capacitors to go with for the Tweeter if I'd like to get a better higher end imaging, open sound etc... for the Ditton 66 MKII? Any input and pointers are very very welcome.

Thank you in advance,

Best,
 
Last edited:
The SL12Si are pretty nice sounding speakers. Interesting is the difference between the SL6Si and the SL12Si is that the SL12Si has a higher (+2dB) sensitivity and higher low frequency -3dB rolloff.

One of my SL12Si in my music system:
View attachment 1120496

If anyone is looking for genuine replacement Mid Bass drivers (Part Number T4075P) to suit the SL12si then there's a guy in Adelaide, Australia that is selling off some surplus NOS drivers still sealed in their original packing boxes which he originally sourced from Celestion when they were still British owned. If you are interested then send me a PM and I'll give you the direct link to the listing as there's no point putting it up here as it will soon be defunct anyway.

BTW I'm still looking for a set of 12's, but as previously mentioned they were low volume sellers in their day and thus are hard to come by.

Good to see jmacd27 rejuvenate his set and enjoy them again. Strange how many people overseas seem to keep their old gear stored away only to bring it out one day and use it again. Sadly here in Australia we seem to part with most stuff or alternatively it finds it's way into landfill. So Sad.

Cheers.
 
Last edited:
Hi Nex,

It was purely a guess as you don't have your country of origin in your profile page thus I couldn't address the closest supplier to you.

Regardless, Jerry sends capacitors that are specifically made for IMF products which I'm sure some of the values that Celestion used would be the same as the UK company IMF used also.

Cheers.
 
Last edited:
Hi Nex,

It was purely a guess as you don't have your country of origin in your profile page thus I couldn't address the closest supplier to you.

Regardless, Jerry sends capacitors that are specifically made for IMF products which I'm sure some of the values that Celestion used would be the same as the UK company IMF used also.

Cheers.
You're absolutely right about my Location sig, now changed it. I'll look for Falcon Acoustics website and see if I can get in touch with them and ask them what would be the best suited Capacitors for Ditton 66 MKII.

thanks a lot ;-)
 
Hey guys!

How's everybody doing? Just grabbed a mint physical condition & working well pair of Celestion Ditton 150. I got them for 40$, never been abused at all. Wanted to know if you guys think its a good score or no?
Plugged them yesterday and all drivers are sounding as expected from Ditton. I already got a few Dittons speakers from 15 MKII/33-44 etc... and always been intrigued by these other lines of 130/150 etc... and this one of course comes with the famous ABR sub.

Few pics:

Y8MIX7d.jpg


McmHVY4.jpg


mQbxZ2q.jpg


What you guys think and if anyone had use them, how do you compare them to other Dittons?

For me, at firs listen, they remind me of the Ditton 15 but with a more modern sound. A bit bright but not too much that its too hi-fi. Just more forward I find. Handles mids & low very well. Still letting the play some days so they regain or can open up as they haven't been used for a while. But so far, I'm not hearing any issues with any of the components from tweeter and the rest.

Cheers ;-)
 
I have a pair of Celestion 120 and the one in the back ground is also a 12" Celestion driver in a Karlson cabinet.
Can't remember the model IMG_7346.JPG IMG_7347.JPG
 
Hi All,

Apart from owning many IMF products I also have quite a few Celestion SL Speakers which I'm quite fond of. Mine are all from the SL6 range but am still looking for a set of the Holy Grails which are the SL12Si, these are the larger version of the SL6 using two Mid Bass drivers.

They would have to be one of the most underated Bookshelf size speakers made.

Anyway I thought I'd kick this off and have a dedicated category for Celestion that was once such a proud British company along with KEF.

Cheers.

Hello from England. You might find this FB specialist group re vintage domestic Celestion products to be of interest I hope https://www.facebook.com/groups/216919988891344/ Additionally, my own column re this topic might prove useful from time to time i hope > http://www.hifianswers.com/tag/celestion/ I update it daily - Monday thro Friday. Regards - Howard
 
Hello from England. You might find this FB specialist group re vintage domestic Celestion products to be of interest I hope https://www.facebook.com/groups/216919988891344/ Additionally, my own column re this topic might prove useful from time to time i hope > http://www.hifianswers.com/tag/celestion/ I update it daily - Monday thro Friday. Regards - Howard

Fantastic to see that there are plenty more Celestion avenues out there. Can never get enough information especially when these companies fall into foreign ownership and choose to ignore the companies heritage.
 
How do these sound compared to classic American East Coast speakers like AR3, Dynaco A25, KLH 6, etc.
 
IMHO I've always found that American gear sounds somewhat harsher while Euro / UK equipment is a smoother more detailed sound. As I said at the beginning that's IMHO.
I would agree, but add that American "East Coast" speakers are closer to Celestion and other British speakers in sound than JBL or Klipsch. Those are much brighter sounding than AR, KLH, etc. Also, the sound of Celestion (and other British speakers) changed over time as technological advances came into the equation in the eighties and nineties. I like my 1970's Celestion Ditton 33's as much as later, more accurate Celestion speakers. I also like my B&W DM4's as much as my later B&W DM14's. They're just different.

corbin, snag some Celestion or other British speakers and find out for yourself. If you're in a large metro area in the US you should have no trouble finding them. As I've gotten older I've found I prefer Celestion and other British brands (B&W, KEF, etc.) to American speakers.
 
I love these. Had several pairs and still keep coming back to them. A super little design intended as nearfield monitors, but the all-conquering NS10 fulfilled that role.

Celestion UL6
 

Attachments

  • 2FCFB794-CAA5-45D1-83BB-A20903B6928B.jpeg
    2FCFB794-CAA5-45D1-83BB-A20903B6928B.jpeg
    61.8 KB · Views: 35
I love these. Had several pairs and still keep coming back to them. A super little design intended as nearfield monitors, but the all-conquering NS10 fulfilled that role.

Celestion UL6

Dreaming one day to put my hands on the UL6. Heard nothing but great things about them. Haven't seen none anywhere in Canada. Guess will have to chase them somewhere in Europe ;-)
 
Back
Top Bottom