• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Trash Bound: a Rookies Tale

willep74

Active Member
here it is the two strays that started it all!
Technics SA-8000X. This was sitting in a garage of the original owner. he said it didn't work anymore. brought it home, opened it up, gave it a Deoxit bath and let it sit over night. I worked the knobs while soaking it again the next day and man was that thing dirty! it must have sat in a smoked filled house for most of its life. Knobs were yellow and sticky. Unfortunately I did not get any before pictures of how dirty it was. Some of the controls didn't move at all.
Let it dry, put it back together, hooked up my old Pioneer CS-G403's, crossed my fingers and turned it on.....:music:!
Sounds pretty good for a 35+ year old machine.
Second was a Zenith MC-7040 that was bound for the land fill as well. This one was not as bad as the Technics, not even by half. Controls all turned pretty freely so this one did not require the same attention as the other one. I am a bit torn, the Zenith seems to really make these Pioneers sing with some good rock and roll through'em, but the Technics really seems to bring out the blues listener. Either way a new vintage junkie has just been minted! I can't wait to get my Altec 315's back to life and see what happens.

so for now this my new vintage stuff, enjoy! i can post more pics as well if any one is interested.
 

Attachments

  • DSCI0325.jpg
    DSCI0325.jpg
    47.2 KB · Views: 260
  • DSCI0327.jpg
    DSCI0327.jpg
    77.8 KB · Views: 255
  • DSCI0330.jpg
    DSCI0330.jpg
    65.8 KB · Views: 211
Register to hide this ad
Welcome to AK! i would like to consider myself and Altec junkie so i will definitely be watching for a thread on those 315's :yes:
 
audiobiker,

after much research, I found out that my Altecs were 305S's not 315's. I thought they were 315's since that is what the crossovers say on the back by the wire posts. it took a while for me to find the right foam kit. They will not make the cut and are now on the auction block. they are not very efficient at 86db, however the cabinets weigh a ton, a lot heavier than my DCM KX10's. They just don't sound as good as my DCM's IMO.
I gave them a go with my Zenith MC-7040 and my Technics SA-8000X and they just didn't seem to be able to deliver. not sure if I had them set up wrong for the room but I was not as impressed as I was at 16 i guess.
can send ya some pics if you want.
 
I always liked the idea of a Zenith receiver. My grandparents had nice wooden cabinet Zenith table top radios from the 50's and 60's which had a very nice sound. It's too bad Zenith could not survive in the world of Sony, Pioneer and other Japanese manufacturers. Of course their receivers were actually re-branded Samsung receivers from Korea if I am not mistaken.
 
the Altecs are posted on the Rockford,IL CL.

I like the Zenith, movies sound great through it, but the Technics sounds better with music. not sure of the correct term but the music seems to have a better range and depth to it when going through the Technics.

I did manage to pick up a working Pioneer SX-650 at a thrift store for $8 over the weekend, so that is pulling duty in the living room right now while the Technics is on the bench.
 
I think I wrote the Altecs off a little too soon. I just got my Zenith back from my friend and wow. Took a little time tonight to adjust the speakers a bit and plugged them in to give them one more go.

I was pleasantly surprised. I still have a lot to learn when it comes to cleaning these receivers up! He did was a lot more thorough and what a difference it made.

So one more round for the Altecs and the Zenith.
 
Back
Top Bottom