• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Which record brush do you use?

I use my 35 year old (yup...vintage brush too) Decca brush. Does the job.

I also have a record cleaning machine from Clearaudio for the wash cycle.

I still have my Decca brush circa '76, but recently figured it has to dirty by now. So I ordered a couple of the Audio Quest brushes and they work just as well all though they are much coarser feeling than the 1,000,000 fiber Decca.

To those considering or using paper towels I learned my lesson 10 years ago. When my Elco was fresh from it's 11 month paint, body and interior resto the level of depth (elbow) and gloss (black) was truly amazing. I could read newsprint in the reflection. I cleaned a bird crap off the roof with a wet paper towel. It totally scratched the sh!t out of the roof. I did the math 5 cent paper towel vs. 5 figure paint job and decided to call my detail guy before I made thing worse. It took 3 hours and 8 grades of polish to bring the roof back.
 
I been using a Diskwasher D4 brush since the early 80's. I also have the Diskwasher stylus cleaner and the Zerostat 3 to eliminate static. I bought everything when CD's were first coming out.
 
For dust - my forefinger. Yep. Sometimes a Discwasher pad with the cleaner fluid that turn the dust into mud and spreads it finely into the grooves.

For dirt - the nylon bristled brush that came with my electric shaver. Works great.
 
I've been using the Discwasher system for close to 30 years. I'm on my sixth brush. It works fine for new records - to maintain them. Thrift store finds get a deep cleaning first, then the Discwasher from then on before each play.

I've seen many people use the 'snowplow' technique and drag the dry edge of the brush off the record - across the grooves. This always seemed risky to me. As soft as that brush is, couldn't you maybe scratch the surface by pulling it towards the edge - across the grooves? The 16 page instruction booklet that came with my Discwasher tells you to never drag the brush across the grooves - only with the grooves.

With the brush damp on the leading edge, I always just slowly lift it off the surface in one smooth action, after I've slowly turned the brush from damp edge to dry edge - always with the grooves. This action takes 15-30 seconds, depending on how dusty the record is. All the dust is stuck to the damp edge, and there is no more to "scrape" off the record by pulling it towards the edge. I've never had any dust stay on the record surface this way. And records I bought new in 1980 still play as though they are new. The thrift store finds are another story - lol

Rob
 
I use a combination of a carbon fiber brush, a Discwasher and a Mobile Fidelity brush.

If I can't get it reasonably clean with any of those, time to wash it.
 
Thanks for all these posts , always great to Read different things people are doing to keep their Lp's Clean .
 
Sorry to keep on about this, but I've got just a quick, simple question about those Japanese sticky-roller-brushes:

If I get one of those, do I still need any other kind of "normal" brush, or is the roller plus a record cleaning system a reasonably complete setup?

Thanks!! :banana:
 
Back
Top Bottom