mhardy6647
Lunatic Member
Which just underscores, yet again, the relative uselessness of the damping factor as a "specification". We're in violent agreement here -- it would indeed be shocking for two different amps to sound the same* -- especially if you're standing in a puddle of salty water & the amp's not isolated.
* If the output impedances of two (or more) amplifiers are very low (fraction of an Ohm) across the audible band, the out-of-band behavior of the amps (plural) are carefully controlled (i.e., so they won't melt down into a reactive load) and the load impedance is very constant as a function of frequency (ahem Magneplanars ahem)... then the amps might sound "exactly the same" connected to that theoretical loudspeaker load, I'd posit.
* If the output impedances of two (or more) amplifiers are very low (fraction of an Ohm) across the audible band, the out-of-band behavior of the amps (plural) are carefully controlled (i.e., so they won't melt down into a reactive load) and the load impedance is very constant as a function of frequency (ahem Magneplanars ahem)... then the amps might sound "exactly the same" connected to that theoretical loudspeaker load, I'd posit.