Wiring blank tube socket for 7591A???

[roberts67]

Hello! I have a B&K 650 tube tester. It has some blank sockets for wiring up newly developed tubes. I need to test some 7591A tubes. Anyone have any idea how I would go about wiring up one of the blank sockets for the 7591A? Plan B would be to modify an existing socket of a simular tube. Any guidance appreciated! Peace. Robert

 

[battradio]

Fist download the manual .
http://bama.edebris.com/manuals/b&k/650/

The 7355 basing is the same as the 7591 , try testing them as a 7335 .

 

[electroking]

I am not familiar with this particular tester, but as far as I know, blank
sockets are for new types of sockets. Testing a tube that fits in one
of the existing sockets should only be a matter of finding the right settings.
Good luck!

 

[kvflyer]

I am not familiar with this particular tester, but as far as I know, blank
sockets are for new types of sockets. Testing a tube that fits in one
of the existing sockets should only be a matter of finding the right settings.
Good luck!

I agree with the above for what its worth...