Yamaha CR-450 Pilot Lamp ?

[jonny guitar]

Yamaha Pilot Light ?

Hi. Searched through the archives but couldn't find definitive info on the specs of the pilot lamp for this little beast...I did find that a CA-1000 (which also takes an led sized bulb - "micro lamp") takes a 12 volt 60ma bulb. Anybody replace one before or have the specs.

there is a 12 volt 35 ma availabe locally...would it work okay (just not as bright)?

Thanks for any help.

 

[merrylander]

Don't have the 450 SM, but the 420 had all three lamps in series so having the same mA rating is a must. Dave (dgwojo) can get you the real thing.

 

[jonny guitar]

^^ Pretty sure it is just one bulb which comes from two little posts on the power section board...there don't seem to be any other from there coming to the window section.

 

[merrylander]

In that case just about any 12V bulb should work as long as it does not draw too much current.

 

[jonny guitar]

In that case just about any 12V bulb should work as long as it does not draw too much current.

Thanks:thmbsp: