Yamaha PC2002M

[bmanone]

You probably can tell from the serial number. I don't have that information though. I was just wondering since it looks to be in such good condition. Also, sometimes the electrolytic capacitors get weak with age. I replaced all of them in my P2200s, a similar (older,)amp design from Yamaha without the bridging circuit and speaker protection.

 

[Jenkster]

Correction, the serial number is NO01066 and thanks for the information.

 

[brutal]

Utilize the inverted output of the C-80 when hooking up to the 2002. Page 4 , fig. 2 of the owners manual
http://sportsbil.com/yamaha/c-80-om.pdf
Pay attention to speaker polarity in Fig. 2. One channel needs to be wired out of phase with the other.

Makes a big difference especially in the low end.

Nuh uh. Buy another one and bridge them both!

:-D

 

[avionic]

Nuh uh. Buy another one and bridge them both!

:-D

 

[SoCal Sam]

I just picked a very nice PC2002M...Any suggestions on replacements would be greatly appreciated...Thanks

Congrats, looks very clean. Great DC offset numbers. Offset is by servo and not adjustable. Feet. Search ebay for "Budwig feet". These look good. Get the 100 pc bag. You will use them for your future audio buys.

https://www.ebay.com/itm/100-NEW-Bu...h=item3f4d88f35a:g:ygIAAOSwv0tVZ0OU:rk:8:pf:0

Take the metal sleeve out and reverse install. The sleeve's flange will act as a washer for the machine screw.

 

[Mrvintage]

here is my latest addition