Yet another Wharfedale W70 crossover thread--HELP!

[murfman]

Beginning restoration of a pair of W70's dated 1966 with ceramic drivers, and non-ported cabinets. Crossovers just have a switch on the back for Full and Soft. Has inductors for both the Woofer and midrange, and the caps for the tweeters are labeled 4 MFD 50 volts, and 24 MFD 50 volts. I have restored a set of W60's, W70's and W90's and all these had L-pads as opposed to a slider switch. With these restorations I used the very LARGE PIO Russian caps and have been very happy with the results. No way will I fit LARGE PIO caps and do not want to mount them remotely. Looking for suggestions on some reasonable sized replacements for existing caps? THANKS Pics attached

 

[sp58]

Hi, these original caps look like electrolytics, there a Alcaps for audio use avaliable at www.falconacoustics.co.uk

 

[murfman]

Thanks for the feedback. Ordered new caps from parts express. Should be here in a few days.