I own a Pioneer PLC-590 and managed to acquire the PA-5000 the other week. Did you manage to find out about the specifications (dimensions and centering) for the arm board? And if so, could you maybe pass them on to me?
Hello, I have a Mcintosh 2505 that is fine for about 15 min and a loud, and I mean Loud buzz comes from the right channel that is not controlled by the volume pots for either channel. It loses that audio from the preamp. Just the loud buzz. It registers on the right meter. If I turn the speaker switch off, it goes away. It is the only way to get rid of it. I got it on the bench right now. Any suggestions? Thanks
Hi! Do you know where I might find a dearing support piece for the 1229 model? Klaus on Vinyl Engine had been selling them, but the place where he had them manufactured is no longer in business. Might you have any ideas? Thanks, Mark
Hi Dave,
Richard at AntiqueRadios recommended you to replace the lamp on my Realistic STA-240 receiver. The burned out bulb is hard wired/soldered and mounted on a small board with designation ISOSAKI 7186. The voltage across its leads with the power on is 7.1 or 7.2 V AC. Do you have an replacement bulb for this receiver, or know where to get one?
Should I replace it with an incandescent bulb or LED?
Thanks, Emil
Is there a chance you still have the power supply schematic to the Sound Valves VTP-100?
I have the circuit schematic but the power supply part seems to unavailable.
best
george
Hi Glenn, Hope you and your family are well. Curious if there will be a meet up this spring? Last meet you played a box scags OUT OF THE BLUES. Had to buy it great record. Hopefully see you soon Steven
I have a Sansui AU 888 that has hum on both speaker outputs. I am seeing 1.2 V on both right and left speaker terminals. The right channel pre-out works fine when plugged into a separate power app but the left channel is showing 10 to 20 V off the left preout jack while the right channel output check is showing 2 mV.
Hi Tom, I have been sent your way from ARF. I have just come into possession of a Stromberg-Carlson 642A and I am having the darndest time locating a parts list and alignment data for this tank. The Rider's schematic does not provide a legend for most of the numbered circuit labels. Would you be able to point me in the right direction? Many thanks.