Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html
Got a nice Sansui 8 for free!Needed some new bulbs and some cleaning but someone removed one of the F-1278 board!! I’m hoping someone somewhere might have one I could purchase!
I have a Sansui AU 888 that has hum on both speaker outputs. I am seeing 1.2 V on both right and left speaker terminals. The right channel pre-out works fine when plugged into a separate power app but the left channel is showing 10 to 20 V off the left preout jack while the right channel output check is showing 2 mV.
I am currently restoring it and have the right channel playing well through a separate power amp.But I’m having a heck of a time trying to figure out why the left channel has 20 V on the preamp left output.
Looking for someone somewhere that might possibly have a schematic of the heat kit AR 1650 stereo receiver I know they are super rare. Need it to troubleshoot.
Trying to work on a Heath kit AR 1650 stereo receiver. Does anyone have a schematic on this receiver? It’s very hard to repair it without a schematic. Thank you.
Have a Technics SA-800 stereo receiver.Everything works well except I have no AM or FM output.Meters don’t move and dead silence on both.Any suggestions on where to check for the trouble?
Harmon-Kardon 730 twin power receiver.Right channel good,left channel steady hiss like fm inter station noise.power amp is good.When I push the low filter,get a loud thump,also lose bass,treble controls on the left channel only?
Denon POA-1500 power amp.Unit comes on and relay clicks when speaker A is pressed.Absolutely no sound out of either channel.Any input on possible problems?
Denon PA-1500 amp.Just this amp use 24V bulbs for the meters and center light?Also the amp powers on and relays on but no output!DC at the speaker terminals is only 5mv.
Harmon Kardon 730 receiver.Anyone know where I can obtain a new volumn control for this unit?Ebayer wants 90.00 for a new one!Just checking to see if there is another possible less expensive source.
I have a Harman Cardin receiver. I’m working on the output board. left channel is fine.bias set to 35mv.Right channel no sound output and cannot set the bias.New trim pots installed.Bulb dimmer dims right down as it should.??
