• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

a-80

  1. QSilver

    Pioneer A-80 over current protection

    I got it this week and at first it worked well. DC offset is 4mV on one side and 14mV on the other. I checked and set the idle current to 22mV as per the manual. But Then it started going into protection. I checked the idle current and dc offset and it was still ok, so I changed the capacitors...
  2. MBuras

    Pioneer A-80 Restoration - Recap & General Notes

    I recently picked up a Pioneer A-80 on the cheap. It had a non-working channel with bad outputs and other various issues in that channel. After quite a bit of troubleshooting it's in running condition and received a full recap. Seeing as there's not much info on this receiver I figured I could...
  3. MBuras

    Pioneer A-80 clipping troubleshooting

    Been working on a basket case Pioneer A-80 for a while. One amp board and outputs were completely trashed. Replaced the obvious and then tracked down a few more severely out of tolerance resistors. That channel is working just fine and begins clipping at 223wpc using direct mode, 1000hz signal...
Back
Top Bottom