• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

ba 3000

  1. R

    Sansui BA-3000 No Power

    Greetings everyone, I have a Sansui BA-3000 I bought with issues. I tested it and realized that the RL02 relay was not functioning and decided to replace both relays on the (F-2511) protection board. I then realized the cermet resistors (R01 and R02) were burned up. I replaced them and the new...
    • Rasmu004
    • Thread
    • ba 3000 ca3000 help no audio no lights no power protection relay sansui transistor
    • Replies: 4
    • Forum: Exclusively Sansui
  2. Black.Audio.Co

    Sansui BA 3000 problems after restoration / recapping

    Dear Friends, I need help and advise on my BA 3000. I purchased this two years ago and fully recapped all the boards (with Elna Silmic ii) and reflowed the solder (audio note) on all the boards. Ran trouble free for six months then the transistors blew on the left channel. Replaced the Sanken...
    • Black.Audio.Co
    • Thread
    • ba 3000 bias adjustment ca-3000 mcintosh recap work restoration project sansui static
    • Replies: 11
    • Forum: Exclusively Sansui
  3. Kreshna

    Was Sansui BA-2000 cut from different cloth?

    Based on look and model number, it seems Sansui BA-2000 is the lowest end model of the BA-x000 series, with BA-5000 on top, BA-3000 in the middle, and BA-2000 at the lowest rung. However, things may not quite that simple. First, the reviews and opinions. I have read positive opinion on Sansui...
  4. Black.Audio.Co

    McIntosh MC 7200

    Hi Friends, Need an opinion on a Mcintosh MC7200 amp. I am currently using a Sansui CA / BA 3000 set. 1. Will it be a good upgrade and will I be able to hear the difference? 2. I plan to use my Sansui CA 3000 as a preamp in the meanwhile till a good Mcintosh preamp is available. And Should I...
  5. Black.Audio.Co

    Sansui BA 3000 Recap

    Hi Guys, Need help!! Completed the recap on the BA3000 and upon powering up there was a problem, upon investigation found out that 2 power transistors were busted. These are Sanken 2SC1585. I am getting a replacement of NOS Sanken 2SC1586 for these and according to the data sheets I...
Back
Top Bottom