• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

bias adjust

  1. A

    CR-2020 bias adjustment issue after replacing some transistors

    I got a CR-2020 recently that had some issues on the right channel, and I slipped while probing it and created even more issues. After all the dust settled, I'm left with a right channel that I can't get the bias voltage below 20mV. There is also more THD on the right channel than the left. I...
  2. mcaddie7

    Eico 2536 Receiver - How to Bias

    Hi all! received an Eico Tube receiver that looked pretty cool for cheap. I checked all of the tubes (same replaced in 69) and they all pass, albeit the 4 matching pairs highlighted in red appear to have more of an “open” according to my tube tester. Anywho, replaced all electrolytic caps and...
  3. J

    Tape for Pioneer rt 909

    Hi Guys, I've bought a Recording The Masters SM900, and i've a Pioneer RT909. SM 900 https://static1.squarespace.com/static/62798251da32f57e31bea13d/t/62f2149f22e6b6134c31427e/1660032161030/fiche_sm900_rtm_2022.pdf https://www.recordingthemasters.com/audiotapes Could you please help me to...
  4. M

    Help Pioneer SA8800 low power and clipping

    Dear all, i need help for this problem (i am quite good in integrated circuits and tubes, not in so complex transistor circuits). I recap the amplifier, clean everything and check the sound live and was quite good. Then i wish to adjust the bias and to do some measurements. I apply with signal...
Back
Top Bottom