• Please note that Audiokarma will be offline briefly for updates early on Monday morning, September 28th.

channel cut out

  1. mcaddie7

    Nikko NR 1019 Channel Issues

    Howdy all, So I have a Nikko NR 1019 that has been giving my troubles. After some time, the right channel will drop out. Now I've troubleshot this to be up to the Amp board as the receiver has a Pre Out / Main In jumper on the back. Both L/R Pre Amp signals go through the Left Amp fine, but...
    • mcaddie7
    • Thread
    • channel cut out channel cutout channel failure channel issues nikko nikko 1019 nikko nr 1019 receiver solid state
    • Replies: 1
    • Forum: Solid State
  2. S

    Optonica SA-5206 A+B Right Channel Out

    Hello! This is my first post and I'm hoping to get some help troubleshooting my Optonica SA-5206. Both the A and B right channels are out. I think there's a blown fuse and I have some replacements ordered. What I'm curious about is why that fuse might have blown. I've had the receiver for 8...
    • sallywalker
    • Thread
    • blown fuse channel cut out fuse blow optonica right channel no sound right channel not working
    • Replies: 4
    • Forum: DIY
  3. dave225

    Channel out - remedial help!

    I have a Realistic SA-2001 amp that is having an issue with the right channel input. The sound is very faint - even with the balance turned all the way to the right. It's staticky & pops like a weak AM radio signal. As I type this, the sound became normal (but ...) But when I switched to...
    • dave225
    • Thread
    • channel cut out inputs receiver static in right channel
    • Replies: 7
    • Forum: DIY
  4. YachtRocker

    Dual 1219 Humm issue.

    I know this has been talked about before but I thought I would throw these questions out as I'm not quite narrowing it down yet. The Issues: When I power up the TT I can hear a humm, more on the left then right, I can readjust the cart and sometimes is goes away other it doesn't. When I start...
Back
Top Bottom