• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

koetsu

  1. BA3000

    Cantilever not parallel with cartridge body

    Hey guys. I had my Koetsu cartridge cleaned up and re-tipped. Things looked and sounded fine when I went to pick it up from the shop that fixed it. After looking at things more closely when I got home though, I noticed that the cantilever appears to be askew from the cartridge body itself...
  2. BA3000

    Do I need a phono preamp?

    I have a Koetsu cartridge with an output of 0.4 Millivolts. My receiver is a Marantz 2275. My question is, do I need an additional phono preamp to accommodate the moving coil cartridge? I have been listening to my turntable with it connected directly to the Marantz receiver, with the only...
    • BA3000
    • Thread
    • cartridge koetsu marantz moving coil output phono preamp receiver stereo
    • Replies: 24
    • Forum: Turntables
  3. BA3000

    Koetsu Third Party Rebuild

    Hi all, I have a Koetsu Rosewood Signature cartridge that I purchased secondhand about 6 years ago. I've determined it must be time for a rebuild or a replacement of this cartridge due to the fact that, A.) it's at least 6 years old and likely much, much older, and B.) There is a distortion...
    • BA3000
    • Thread
    • cartridge distorion koetsu rebuild rebuilt repair sibilance
    • Replies: 54
    • Forum: Turntables
  4. BA3000

    Someone please help ID my tonearm

    Hey Everyone. I’ve been following the forums for quite a while, but just recently signed up and this is my first post. I was hoping someone might be able to identify the make and model of my tonearm. There is no apparent brand name or logo visible. I bought my whole turntable setup that it’s...
    • BA3000
    • Thread
    • hw-19 identify koetsu make model tonearm vpi
    • Replies: 6
    • Forum: Turntables
  5. Krasdale

    New cartridge suggestions

    Hey all, I'm looking to upgrade soon, and it's been difficult getting good information on cartridge/tonearm matching. Ultimately, I'm looking for a LOMC that would work well with a Jelco TK-850S tonearm (effective mass of 13.4g) and a Tavish Design Adagio phono stage. The turntable is a heavily...
    • Krasdale
    • Thread
    • dynavector jelco koetsu lomc lyra musikraft ortofon tavish design tonearm
    • Replies: 12
    • Forum: Turntables
  6. My pride and Joy

    My pride and Joy

    A rare Koetsu Kodomo turntable. with Audio Technica arm. Cartridge is a cheap Nagaoka MP11...but sounds amazing.
    • JJCharles
    • Media item
    • koetsu
    • Comments: 1
    • Category: Member's Systems
Back
Top Bottom