• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

sl-1300mk2

  1. Dave Sanders

    Warning - Cleaning Technics SL-1300/1400 & 1500Mk2 front panel with IPA

    It's a very common problem for the push buttons on these series of tables to develop sticking with age. I was overly aggressive in cleaning out the brass bushings with IPA to remove the decades of sticky junk which would not allow the push buttons to move freely. The excess IPA got on the inside...
    • Dave Sanders
    • Thread
    • carver mxr-130 push buttons front panel ipa sl-1300mk2 sl-1400mk2 sl-1500mk2 technics
    • Replies: 7
    • Forum: Turntables
  2. Dave Sanders

    Technics Optical Sensor Circuit SL-1300Mk2

    After fighting the Optical Sensor Circuit in my SL-1300Mk2 for many days I have arrived at a solution that I believe makes the circuit much easier to adjust. In thinking about the only portion of the NAND gate IC501 (Gate 4) to serve a logic function in the Sensor Board I tried to determine the...
  3. Technics SL-1300Mk2

    Technics SL-1300Mk2

    Recently acquired this fantastic turntable in like new condition. However, as is the case with all of them the cue arm lever was broken. I was able to obtain a 3D printed replacement from https://i.materialise.com/en/shop/designer/sigurd-de-gruyter and was able to restore it.
    • Dave Sanders
    • Media item
    • 3d printed cue arm lever i-materlise sl-1300mk2 technics
    • Comments: 0
    • Category: Member's System Pics
  4. Dave Sanders

    Technics SL-1300Mk2 Auto Return Problem

    I just replaced the infamous cue lift arm in my Technics SL-1300Mk2. All functions work correctly except for the “Auto Return”; the Auto Return Switch is in the correct position. Activating the “Stop” button causes the tone to lift and return to the home position and the motor shuts off. All...
  5. B

    Technics SL-1300MK2 Transport Screws

    Does anyone know the size of the transport screws for the SL-1300MK2? I found threads on here describing transport screw sizes for the SL-1600MK2, but not this one. I want to use the transport screws to bypass the shot suspension until I can repair it. Any help would be appreciated
    • blargh22
    • Thread
    • sl-1300mk2 sl-1400mk2 sl-1500mk2 technics transport screws
    • Replies: 0
    • Forum: Turntables
Back
Top Bottom