• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

teac 4010s

  1. J

    Teac A-4010S Capstan Problem

    I recently picked up this Teac A-4010S and replaced the belt. Everything seems to be working fine besides the capstan motor running as soon as the pinch roller is pulled to left, which has cause tape to be ruined after pressing stop or rewind during fast play. Any suggestions would be much...
  2. F

    Teac A 4010s only recording on left channel (Ra-40s amp)

    I recently recapped all the .1uf Suzuki "bombs" in my Teac a 4010s and got the deck up and running. Thought I was in the clear til I went to record something and only the left channel was working. I opened up the transport again to find the front of the two stop switches (the ones activated by...
  3. E

    Teac 4010S Need Component Layout to Adjust Levels

    I have a Teac 4010S that I’m trying to set the playback and record levels on. There are three different types of board sets for this deck and I can’t find a manual that matches the unit that I have so I don’t know which pot is which. Mine is the one with the 3 relays on the board. Does anyone...
  4. dbonin

    TEAC 4010s recap list?

    Anyone have a recap list handy? I'm going to do all the suzuki's and all the electrolytics. Thanks!
  5. yesterdaze

    Teac 4010s restoration. Need help.

    Hello. I cleaned and lubed my entire deck and reassembled it. I have one problem that I need to correct. The tape plays well in forward play mode, however the tape seems to be driven down nearly 3 mm by the capstan wheel in reverse play mode. Capstan will push the tape up just 1 mm in forward...
Back
Top Bottom