• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

ultra linear

  1. Tubeglowpio

    Dgse1 ultra linear

    Hey everyone, I've built a couple tube amps in the past but finally ended up pulling the trigger on building a dgse1 since I've heard mostly good things and love the sound of the maggie 8601 I suped up. I changed a few things from the schematic but mostly just the power supply to adjust the...
  2. thorpej

    Location of screen taps on Triode A431S output transformers?

    House is still a construction zone, meaning my garage is not usable yet, and it's driving me nuts. But if I can't build, at least I can put thought experiments to paper, so another amp is on the drawing board. I'm planning a 6550-based ultra-linear amplifier, and I'm considering using the...
  3. thorpej

    Brainstorming a push-pull 6L6GC stereo amp

    I don't really need another project in the queue, but I have a bunch of nifty parts in the garage and can't help myself... I have a few nice, beefy MusicMan SS guitar amp PTs that will work well with a 4x voltage multiplier to get 395Vdc or so, with plenty of current capacity. I have a bunch...
  4. Harlon

    7868 or 7591 Push-Pull Ulta-Linear Design Help

    So here is a window into how my brain works. Step one: found a Bogen CHB100 on my local Craigslist for cheap. It had a quad of these. \/ (that's my attempt at a down arrow) These are 7868 power tubes. I've had a desire to build an amp in the 20-25 watt range so the hunt began. Looked up the...
  5. Harlon

    Decision Time: To Upgrade OPTs for Maggie 9304-20 or Not!?! Help

    For those who aren't following along, I'm amidst a console rebuild with a 9304-20 amp at its core. I'm working through a full console refurb, and it is time to either order upgraded output transformers or not. The idea from the beginning has been to go UL with the 9304-20 using new Dynaclones or...
Back
Top Bottom