1060, feet mounting screw thread? Identify.

[Old Guy8]

Back from tech and installed in new wood cabinet.
I Need longer screws for feet under new 1060 cabinet.
They appear to be close to #8-32. But bind up within a few threads, when mated with an #8-32 nut. SAE or metric or ?

I can scour the hardware store. But wondered if someone can help narrow it down.

 

[thxdave]

You need metric sized M4-.70x25 for the wood case.
Finally....a question that even I can answer! ;-)

 

[OBMG74]

Glad to see that you got it back.
Quite a process if I remember correctly.
Looks great in the case.

 

[Old Guy8]

Thank you thxdave. Saves some leg work.

Been waiting for my tech to fix it since last fall. He was finally able to compare wiring to another 1060. Found a missing wire. Sounds great. New are 38 caps, four output transistors, potentiometer and some resistors.

I'm using an external switch to power on/off. Save wear and tear on It.

Wood cabinet was made by AKer Assalah. Fine workmanship.

 

[thxdave]

Curious what that black ring around the volume knob is.

 

[Old Guy8]

Curious what that black ring around the volume knob is.

It's an o'ring. Makes using my remote easier.

 

[thxdave]

What kind of batteries does that remote use? <BG>

 

[Old Guy8]

What kind of batteries does that remote use? <BG>

They're rechargeable, but they're old.

 

[kwayde]

Batteries that come in packages of six.

 

[onemug]

Wood cabinet was made by AKer Assalah.

Beautiful. Every piece of vintage Marantz that I own is in a wood cabinet. Has to be. Does not apply to their amps of course.

I'm using an external switch to power on/off. Save wear and tear on It.

Good idea. My preferred way also.

It's an o'ring. Makes using my remote easier.

Love it!

 

[Old Guy8]

One of the feet was repaired. But came apart. Have to look for replacements.

 

[thxdave]

Here you go:

https://www.amkproducts.com/marantz/feet/

(batteries are included)

 

[Old Guy8]

Here you go:

https://www.amkproducts.com/marantz/feet/

(batteries are included)

Thanks for link.
But, I had already ordered some 3/4" dia x 3/4" high x M4 hole feet. Thier smaller dia. But Don't think I'll notice.
I was in hurry to get in order. Want to get it in operation.

 

[Lavane]

My model 112 Tuner has different feet. One of the 1060's I restored had them on it. I swapped them for the right feet on the tuner.
I really need t9.get cw inets for my 1060 and 140 power amp. I just have the one for the tuner. I use in my main aystem.