Black.Audio.Co
Member
Hi Friends,
I have acquired a pretty good ADS 810 speaker and am happy with the sound and plan to keep it in my secondary system.
I would like to ask help for the following:
1. The Speaker binding posts on the back of one speaker are loose and i would like to tighten them. I tried to remove the speaker but could not get the crossover to budge despite removal of all the screws and one bolt that was visible.
I tried to pull it but gave up as didn't want the board to crack.
Please help to advise how to open this up so can get it sorted out.
2. The Rear panel of one of the speakers has started crumbling due to age / humidity (I am in Indonesia) and i would like to replace the mdf panel with a new one. Please advise if this is recommended. Woodworkign is not to expensive here.
Thanks in advance for the help.
I have acquired a pretty good ADS 810 speaker and am happy with the sound and plan to keep it in my secondary system.
I would like to ask help for the following:
1. The Speaker binding posts on the back of one speaker are loose and i would like to tighten them. I tried to remove the speaker but could not get the crossover to budge despite removal of all the screws and one bolt that was visible.
I tried to pull it but gave up as didn't want the board to crack.
Please help to advise how to open this up so can get it sorted out.
2. The Rear panel of one of the speakers has started crumbling due to age / humidity (I am in Indonesia) and i would like to replace the mdf panel with a new one. Please advise if this is recommended. Woodworkign is not to expensive here.
Thanks in advance for the help.
Some people never do get the crossovers out.