braun

Had a customer drop off a Braun PS-600 turntable with weak right channel signal. Seems to be a pretty rare little guy and all service manual / reference material is in German. It's a fully sprung unit with a sealed underside and uses a groundstrapping method to ground the device where the table...

In case it's helpful to anyone... I've been trying to replace a 242-2731 Braun tweeter in a first-gen ADS L710. I've seen it mentioned here that if these units show a DC resistance reading then they're probably fine, but not so in the case of the two I have bought off of eBay so far. I tried...

Looking for some guidance since I've hit a wall with my dim bulb tester. I have limited experience with tube radios and foreign makes. I have a Braun SK-55 "Snow Whites Coffin" that started popping fuses after plugging in the turntable power. I've replaced out of spec caps and resistors as I...

Hi Guys anyone with the service manual, user manual for this one :) I need some info of the fuse and for a ReCap Best D.

Hello fellow AudioKarma enthusiasts, I recently found and acquired the original Braun HiFi wall system. Does anybody know or have information on how to securely and properly wall mount the entire unit?I was under the impression that perhaps Dieter Rams' Vitsœ 606 shelving system rails would do...

Greetings to all members from distant Serbia. I am considering purchasing a Sansui 661 stereo receiver to be listened to in a system with a Braun (ADS) L615. Are they the right choice? The room is 25 square meters, the sound source is primarily a record player (Pioneer PL-117D with an old AT95)...

Hello to all, It's been a while since my last post and I find myself in need of the forum wisdom again. I'm trying to internal update my daily drivers, a pair of Braun L1030, but I don't know if it's worth it and if yes, if I'm using the correct parts. I should point out from the beginning that...

Hi, I want to replace transistors 2SC1061 and 2SC1162 in a Braun Regie 350. These are the subs I'm considering: 2SC1061 -> MJE15034G 2SC1162 -> KSD794AYSTU I'm confident that the MJE15034G is a good sub, but I have no idea about the KSD794. It all seems fine, but the ft is way off. Then...

Hello, I recently came into possession of a Braun Audio 250 45/4 which had a shattered dust cover when it arrived. Would anyone have a good resource re: where I can source a replacement cover or have a new one fabricated? If possible I’d like to preserve the ability to have the dust cover on...

As an architect living in Germany, there was no way i could avoid beying attracted by some Braun gear. I can honestly say that they are not only nice, but also nicely designed, with a few unexpected features. So is the case of the Bran PS 430 turntable. It is the simpler brother of the PS 500...

I am relatively new to vintage audio and on a quest for vintage speakers and will appreciate your opinions and feedback. I am looking for a pair of speakers that: will fit well in a mid-century modern design room work in our sunroom that is pre-fab like and mostly windows will sound good when...

Craigslist buy. Couldn’t pass it up. And I knew there would be issues, but I have a capable tech so what the hell. The tubes in it are worth more than what the guy was asking. For the most part it looks good, but looks like someone plugged it in when it was set at 240v and not 110v or 125v. The...

...and I'm hoping someone can send me some images of the missing piece. Background: My sister- and brother-in-law kindly gave me their non-operational Braun 400S turntable for Christmas (they included their walnut kangaroo speakers, too, for real it's a kingly gift). They're fastidious people...

Hi all, I have a few pieces of Braun audio equipment and I'm interested in a set of speakers, either from ADS (given the connection) or Braun. I've seen both Braun and ADS speakers being labeled the same thing - L710, for example. There's a Braun L710 and and ADS L710. Should I expect those...

Hi Friends, I have acquired a pretty good ADS 810 speaker and am happy with the sound and plan to keep it in my secondary system. I would like to ask help for the following: 1. The Speaker binding posts on the back of one speaker are loose and i would like to tighten them. I tried to remove...

These are for sale locally, but I can’t make out the model number on another photo in the listing. I’m buying them anyway, but can someone ID them?

I just want to say in advance... Thank you all. I have been collecting vinyl and vintage equipment for about 5 years. This website has been absolutely instrumental in my hobby. I don’t really have a good reason for not signing up sooner. I think maybe I did not feel I was worthy of joining in on...

Hi, my four ADS 910 woofers are numbered\labeled\stamped: 4576, 8 Ohm, 10 4476, 8 Ohm, 10 4376, 8 Ohm, 9 or 6 (the 9 or 6 is circled) See attached pics. I'm pretty certain using the "a/d/s parts schedule 1992 share" on http://sportsbil.com/ads/ that the woofers in my ADS 910's are not ADS...

Dear Friends, Today I was lucky enough to acquire a pair of Braun LV1020 active speakers- huge, impressive beasts from the early 70's with internal tri-amping. They cost a fortune in their day, and seem to be in original and very clean condition inside and out. But the sound is way of what you...

What are your opinions on hifi equipment from the 80s and 90s? It seems that everybody has an opinion or a memory on pieces from the 70s. From the beautiful silver faced Pioneers and Kenwoods to the amazing wood cased Luxman and Marantz plus all the sweet Yamahas and Sansuis between. Not to...

I have a pair of Infinity Quantum 3s. Both of the midranges have broken tinsels. I am more inclined to replace them than to fix them or to $end them out for repair$$. I am recapping the crossovers. I had the Watkin woofers refoamed long ago. What is a good near-equivalent speaker that...

I have a old set of Braun\Visonik tweeters. I have been playing around with different coatings on the dome and would like to use audio software to analyze the different coatings. I also know very little about analyzing speakers other than how they sound to my ear. I have a decent microphone. I...

Howdy Folks! In another thread I bought some Infinity Monitor Jrs from a thrift store for $12. Yada yada yada... Here is the dead Infinity Braun Dome Midrange. No capicitance? From the terminals. When I put the MM to 200k and short the leads I get a 0 as I should. There are no obvious signs...

Dear AK-community! First let me say big hello to all of you and introduce myself: My name is Gene, I am from Ukraine. Have always loved music - just music as it is. More exactly speaking - a music material. So I never really cared about the sound itself. Is this Dougan's track in mp3-64? Great...

This is my first of what I'm sure will be many posts, so hello and thank you to all of you for your help. :) I have an opportunity to buy a Braun MM 4A-8U console stereo for $100. You can see an example at http://www.radiomuseum.org/r/braun_mm4a_8u.html Here's the catch: It currently won't...