• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Air Guns

@Imprecise
Alright then. I'm not a hunter, except for these dang rodents. I am hardly knowledgeable in such things.
I had a quick look at some pics of the 44/40, and that is definitely not what it was. The ones we were shooting looked like missiles to my eyes, and, in comparison to my .22 rim fire.
I've been around two collectors of custom rifles in my day; the mentioned dentist, and, a real estate developer. The 44/40 bubble probably came about in my time with that gent, the r.e. developer (me: fine home finisher, finishing his home, which was to be in Archetectural Digest mag, as a cover and featured home). I built a custom display case for his collection.
This is a picture of a picture from the Arch.Digest article. This is about 1/4 of his collection:
DSCN2001.jpg
 
@Imprecise
Alright then. I'm not a hunter, except for these dang rodents. I am hardly knowledgeable in such things.
I had a quick look at some pics of the 44/40, and that is definitely not what it was. The ones we were shooting looked like missiles to my eyes, and, in comparison to my .22 rim fire.
I've been around two collectors of custom rifles in my day; the mentioned dentist, and, a real estate developer. The 44/40 bubble probably came about in my time with that gent, the r.e. developer (me: fine home finisher, finishing his home, which was to be in Archetectural Digest mag, as a cover and featured home). I built a custom display case for his collection.
This is a picture of a picture from the Arch.Digest article. This is about 1/4 of his collection:
View attachment 1293174

Some real classics in that exhibit. Great work on that display case! Excellent grain choice, terrific finish. Is that all clear or is there some stain in it?
 
We built and furnished the *house(s) with old growth teak that the owner somehow was able to export as full logs direct out of Thailand.
The logs were shipped to Washington state for milling, then shipped to Orange County for our building use.
That particualr piece is of a veneer over plywood due to some curving features.
The house was built into a bluff on a hillside, so the framing was steel piers drilled into bedrock, and, into the bluff face (my partners specialty). The walls were basic dimensional lumber framing, and, then plastered, with teak embelishments.
By that, I mean we built all of the furniture of teak, all of the trim in solid teak. This included these intense, long, continual curving staircase handrails of teak, stair stringers, giant rolling doors, all the window frames in the house, patio furniture, massive curved wood features (anything curved in construction adds intense complexity). Also things like indoor Koi ponds w/ wave machines,, tide pools, hidden rooms

The finish was clear Watco Teak Oil and waxes, and, about 7 coats of hand-rubbed varnish, buffed back to a matte finish with the waxes.

He was really excited about having just acquired a Sharps rifle, which i think is the one that is leaning up in the bottom of the cabinet?

* there were two houses, for two brothers, that we built of teak. This is the first of the two. They were oth on the beach, and just a couple of doors apart. Both were in Architectural Digest Magazine.
 
Last edited:
We built and furnished the *house(s) with old growth teak that the owner somehow was able to export as full logs direct out of Thailand.
The logs were shipped to Washington state for milling, then shipped to Orange County for our building use.
That particualr piece is of a veneer over plywood due to some curving features.
The house was built into a bluff on a hillside, so the framing was steel piers drilled into bedrock, and, into the bluff face (my partners specialty). The walls were basic dimensional lumber framing, and, then plastered, with teak embelishments.
By that, I mean we built all of the furniture of teak, all of the trim in solid teak. This included these intense, long, continual curving staricare handrails of teak.

The finish was clear Watco Teak Oil and waxes, and, about 7 coats of hand-rubbed varnish, buffed back to a matte finish with the waxes.

He was really excited about having just acquired a Sharps rifle, which i think is the one that is leaning up in the bottom of the cabinet?

* there were two houses, for two brothers, that we built of teak. This is the first of the two. They were oth on the beach, and just a couple of doors apart. Both were in Architectural Digest Magazine.

WOW!

The bottom rifle is a Henry. The three above it look like Henrys also. The one above that looks like it could be a Sharps 1878 but the barrel seems too short. Not sure about the top two.
 
The top two are side by side shotguns.
There were three more sections just as full, and the rifles were of that caliber. They also included bolt action scoped hunting rifles to the left of the cabinet.
The one just above the bottom, or, what was the original rack, is a Rifleman repeater. You can see the large spinning cocking ring, sort of obscured by the bottom Sharps. I always thought that was a pretty neat piece.
 
Last edited:
For several months now, I've had an ace bandage wrapped cheek weld pad, due to my building it up, and fitting of the rifle to my dimensions.
Today, I finished it with some old salvaged leather. It is a simple effort, but, in putting it to my cheek, after lacing it on, it feels really nice.
DSCN5389.jpg DSCN5481.jpg DSCN5483.jpg
 
My obsession,....
So, I've been involved in controlling a population of rodents down my neighbors property line; my long distance shot. One day, I went to the Google Sat images page, and, moved in as close as allowed. I wanted to try to get an estimate of distance.
At that point, I broke out two scales; a steel "ruler" scale with standard and metric measures, and, a pair of calipers.
I took the calipers and measured the map key scale on the monitor. I took the steel scale, and, measured the distance as shown on the monitor. I took that steel scale measurement, and, applied the calipers scale to it, did the conversion to standard (american) measure, and came in at 200' I was satisfied with that; it felt realistic. I also used this same measuring "technique' to measure out my longest shot.
Curiosity has gotten the best of me. So, I broke out a walking wheel measuring wheel, and walked it out. It came in at 215'
I also measured out to where I have had my zero-in at this same shot. The zero-in target is three sticks, each about 1" in diameter, and varying lengths from cigar butt, to 12" stick, with the mid-size being a full cigar size. These measured at 235'
Now, pure luck being what it is, I've managed to stack these sticks right onto/next to each other with practice shots. Not much skill involved, as one of them came flying out of a bunch of dead flattened grasses, and joined the pile when I missed about a foot low. Pure luck - but I am getting better. I've managed to isolate one stiick from the bunch, and have moved it uphill, away from the rest, by a few feet now. I have also managed to hit it multiple times in a row.
Yea, curiosity satisfied.
 
My obsession,....
So, I've been involved in controlling a population of rodents down my neighbors property line; my long distance shot. One day, I went to the Google Sat images page, and, moved in as close as allowed. I wanted to try to get an estimate of distance.
At that point, I broke out two scales; a steel "ruler" scale with standard and metric measures, and, a pair of calipers.
I took the calipers and measured the map key scale on the monitor. I took the steel scale, and, measured the distance as shown on the monitor. I took that steel scale measurement, and, applied the calipers scale to it, did the conversion to standard (american) measure, and came in at 200' I was satisfied with that; it felt realistic. I also used this same measuring "technique' to measure out my longest shot.
Curiosity has gotten the best of me. So, I broke out a walking wheel measuring wheel, and walked it out. It came in at 215'
I also measured out to where I have had my zero-in at this same shot. The zero-in target is three sticks, each about 1" in diameter, and varying lengths from cigar butt, to 12" stick, with the mid-size being a full cigar size. These measured at 235'
Now, pure luck being what it is, I've managed to stack these sticks right onto/next to each other with practice shots. Not much skill involved, as one of them came flying out of a bunch of dead flattened grasses, and joined the pile when I missed about a foot low. Pure luck - but I am getting better. I've managed to isolate one stiick from the bunch, and have moved it uphill, away from the rest, by a few feet now. I have also managed to hit it multiple times in a row.
Yea, curiosity satisfied.
Did you miss the ruler button on the Google Earth toolbar?

It's the one in the middle.

ruler button.jpg

You can measure point to point distances in inches, feet, yards, miles, centimeters, meters, kilometers, etc.. It's quite accurate.
 
Last edited:
Keeping the Beeman Chief review alive, and, real time,...

The bluing isn't worth a crap. I've already mentioned that. Hand prints have caused a surface rust patina that just bugs me. I've tried oiling the barrel, but, that quickly went away, and the rust never slept.
I looked at bluing kits. I had no faith in that direction. So, I went in a different direction.

DSCN5486 (1).jpg

There is a product out there by a company called K&S Precision Metals. They offer a selection of precision metal tubing that is concentric, such that, each piece fits into the larger/smaller tubing section in the rack next to it; perfect smooth slip fit. In fact, so perfect, as to be useable as bearings in a cherry wood tonearm that was offered for a while (before the guy died). I have two of those tonearms. [/rambling]
I found a piece of the 3' tubing in 19/32" diameter, and, bought that, and, fitted it onto the barrel. I greased the now inner barrel to keep it from continuing to rust, and, slipped this brass tubing sleeve over the barrel, to create a shroud that won't rust.
The fit is a slip/fricition fit, with each piece held in place by larger concentric pieces that filled the gap between barrel and air reservoir. They created the perfect slip/jam fit to keep the peices in place, and firm.

five to the 10-Ring since saturday.
 
Bluing on the Webley C1 was best of all I'd had new, the 2 FWBs were both well used but probably 1st class new.

The air reservoir tube is newer than the barrel, from when I took it up to Beeman for service, early on. It is doing the same thing, rust patina, but, not as far advanced. At some point, I'm going to break it down again, and, spray paint the air res. black.
 
If it was me, next time I broke everything down I'd just take it to a gunsmith and have it blued. The home kits have never worked well for me, so I wouldn't go that route
 
@GuyK
Any sort of ballpark guess on cost? Anything would be a help, please and thanks. Don't do any research, please; just curious if you've ever priced that sort of thing out.
I knew going in that it was an inexpensive iron. So, I'm not that disappointed in what has happened;.. expected this sort of thing.
 
Evidently me and BG have wiped our deluge of critters out. The last one (I mentioned it above) I shot, hit and he went up but we have not seen it since. I'm thinking he went off and died. That's been quite some time back too.
She is continuing to stand watch daily from her spot at the window tho but that's her job and she knows it.:D
Been pretty peaceful lately.
 
The air reservoir tube is newer than the barrel, from when I took it up to Beeman for service, early on. It is doing the same thing, rust patina, but, not as far advanced. At some point, I'm going to break it down again, and, spray paint the air res. black.
Check "hot bath blueing".
 
Evidently me and BG have wiped our deluge of critters out. The last one (I mentioned it above) I shot, hit and he went up but we have not seen it since. I'm thinking he went off and died. That's been quite some time back too.
She is continuing to stand watch daily from her spot at the window tho but that's her job and she knows it.:D
Been pretty peaceful lately.

My attentiveness has led to a reduced presence on my western perimeter (the long shot). But, my lack of attention to my southern and eastern perimeter has led to recent breaches at those points, providing fodder for my Crosman .177, in close.
 
@GuyK
Any sort of ballpark guess on cost? Anything would be a help, please and thanks. Don't do any research, please; just curious if you've ever priced that sort of thing out.
I knew going in that it was an inexpensive iron. So, I'm not that disappointed in what has happened;.. expected this sort of thing.

Sorry, I have no idea about what current costs might be. 20 something years ago I was looking in to having one of my centerfire arms re-blued, and it was going to start at around $100. I would presume costs have increased since then.

Check "hot bath blueing".

Definitely hot blueing. Cold blues are totally worthless. And they look awful, too.
 
Back
Top Bottom