• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Air Guns

I'm thinking about a tiny house, and an Air_B&B thing; Mikes Squirrel Popping Rancho. Might try making some income from them (kidding of course,... they're all mine.)
 
Check out my new toy. All the way from the Netherlands. PP-700S-A in .22. It's a Mini cannon. Look at it compared to my P-17. IMG_0755.JPG IMG_0759.JPG IMG_0760.JPG IMG_0761.JPG
 
Air guns (AGs) are arms that use air or another compressed gas to propel a projectile. Generally, brain injury may occur in children due to their incomplete skull development; however, the less-resistant and thin region of the skull in adults may also be penetrated by an AG shot. In this paper, we present three adult cases treated in our clinic for brain injury caused by an AG. The first case had brain and skull damage related to the high pressure of the compressed gas, and the others additionally had foreign bodies in their brain. All of the patients were operated. Two were discharged without neurological deficit; the third case had a permanent slight hemiparesis. Average follow-up was 11 months and no abscess formation was observed in this period. AGs are known as low-velocity arms; however, they have the potential to cause brain injury, and brain penetration may occur especially in the relatively less resistant and thin sites of the skull such as the orbit and temporal and occipital bones. As cerebrospinal fluid leakage is one of the expected conditions, urgent surgery is usually required.


Turkish journal of trauma & emergency surgery: TJTES 16(5):473-6 · September 2010
 
Dropped yesterday by Ruger Targis into the Jaws of Death.
1st one we’ve had since me and Baby Girl cleaned out about two dozen over the course of about a year.
She’s stoked and ready!
 

Attachments

  • 8037F2EF-4084-494F-B30F-B73F6909E85A.jpeg
    8037F2EF-4084-494F-B30F-B73F6909E85A.jpeg
    67.6 KB · Views: 17
  • 9E4B0EB6-150A-4A17-9A76-28014BAA0CF1.jpeg
    9E4B0EB6-150A-4A17-9A76-28014BAA0CF1.jpeg
    90.3 KB · Views: 18
The babies have meerged from their burrows, and are everywhere. My eradication efforts have just been made to be in vain. But, it also means that I need to stock up on pellets! nyuk nyuk nyuk...

date stamped may 30, 2019...
patio shot, w/ firewood backdrop pellet catch (not needed).
Downrange view. Don't mind the work clothes drying in the breeze. They make a wonderful blind, with active features.
DSCN6987.jpg DSCN6988.jpg DSCN6986.jpg
 
Got to thinking about the old Benjamin 312. Last time I got it out it wouldn't shoot, it'd pump up but no oomph on the pellet. I oiled it, no difference so I put it away again. Started reading up on rebuild kits, there's a special tool needed, etc. So I got it out this evening and it's back shooting. I guess the oil ran down where it was needed, stored it with one pump when I put it away last, glad to plink some cans. It was shooting low from where the rear sight was set, I bet the velocity is down a bit so I'm still going to get a kit and go through it.

It's a '61 model, just like me. My dad worked at the Post Office and the janitor bought it to shoot pigeons off the building. Somebody saw him and reported it so dad bought the gun off him for $25 back in the mid/late 60s, it was what I shot all the time growing up - lots of time with this thing. Buddies had lever action Daisy .177, the Benjamin was on a different level.

It's a real trip down memory lane, one of the few things I still have from that early in life. Oil cans were metal, that's the first thing I remember dad shooting with it, went right through it and that impressed the crew gathered around in my grandparents driveway.
 
It was shooting low from where the rear sight was set, I bet the velocity is down a bit so I'm still going to get a kit and go through it.
Measure it!

Seriously, one very helpful tool every shooter should have:

531741.jpg
 
My Beeman 1322 Chief was to turn 1 year old on July 31, and, its warranty was to have ended at that time.
A week prior to that, i had a shot at a rodent, and nailed it; day over. I rack the rifle, expecting it to be ready for more action in the morning.
Next morning arrives,.... actually afternoon,.... and I have another shot at a rodent, and, pull the trigger, only to hear a boink of spring and hammer, but not pop of air. I look at my on-baord air gauge, and it reads dead flat, no air. WTF??
So, I take it in the house and try to pump it up, and, cannot get any pressure to build. So I taped a balloon to the end of the barrel. SUddenly, I'm filling the balloon up through the barrel, indicating that the valve ended up stuck open with my last shot.
AcckkKK! My Beeman waas dead at just shy of a year.
I contact Beeman, and, explain my predicament, to Peter Hernandez, the custromer service rep/technician. He tells me to bring it up, and they'll fix it for me. I fully informed him of this thing having likely shot 4k pellets in its time; no matter to him.
Fortunately, I live an hour from them (in miracle traffic), so I drive it up there the next day (last tuesday). I meet up with Peter, and we go back to his technical bench, where he starts tearing down the gun, into many small nuts and bolts pieces, and o-rings; completely striopped down disassembly. On extracting the valve, he determined that it had gone bad, and, replaced it with a brand new valve. He then rebuilt the rifle with all new o-rings, and, a new one-way valve at the end of the air reservior tube (critically important piece).
He spent three hours with me showing me the works of the rifle, and on reassembly, we took it to the chronograph, where we came it at 850 with heavyweight pellets (originally rated as 825fps, if I recall correctly).

So, if anyone should ever think of Beeman, or, Beeman Chief PCP platform specifically, I cannot possibly begin to give them enough high praises. a great bunch!
 
Super big lull here this summer and I'm probably as rusty as the garden gate. We've cleaned out a couple of jays from time to time but there's been no critters. Yet.
With summer slowly closing they'll be on the hunt for winter nesting and the ol' back yard Pin Oak w/acorns is just simply irresistible.
Baby Girl keeps watch from the living room window cause she knows they'll be back and I keep my eye on her.
Hopefully I'll be reporting back soon.
 
So,.. I got me a new toy. Beeman P17 .177cal. They sell for a whole whopping $30'ish, and are an absolute hoot to plink with.
IMG_1678.JPG

I dialed it to leave a nice tight group at 25'. From there, I've been plinking a shooting stick at 30'. That stick is about 1" in diameter, and about 6" long. I stand it up in mulch on a dirt slope, and, hit it with regularity. So, I took it further, and started hitting it out at 50', with regularity. Its amazingly accurate little shooter.
Mine has the solid black front sight, not the neon optical post sight. I painted the face of the front sight white, for contrast with the rear sight.
The rear sight is adjustable for windage and elevation.
To cock it, you pull the faux hammer back, and the slider splits, and pivots forward, begining the air intake stroke. From there, you fiddle a wee bit with loading the pellet into the barrel, and then close the slider back.
CAUTION!
The upper slider closes and compresses air in that stroke. It gets to a point where it suddenly slams closed. Any body part or clothing item that happens to be between the upper and lower portions is just plain old simple, **** out of luck! This thing bites, HARD!
My first time cocking it, I got my left pointer finger caught, at the middle of the pad. You need to pull the faux hammer back to free the now locked together pieces. When I did, there was enough blood to not be able to keep it from dripping on the floor.
I've caught my shirt a couple of times. I've read of a guy getting his man nipple caught (SOB!!)
And, just today, it grabbed my left thumb, just shy of the end knuckle, and,... i got to pull the faux hammer back again. No cut or blood this time, ust a nasty bite.
Given the now standardized ownership biting ritual, its a fun little plinker! and, what else can you do with $30 that gets this much fun and pain?
 
Back
Top Bottom