• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Altec 9440A Recap

Will have something new to listen to the 9440As on soon (after refoam) :) Given how revealing these speakers seem like they may be, it will be interesting to see if I can hear any more differences between the two sets of boards I still have worked up....


32793075134_2dbdf7bbbe_b.jpg
 
unless you can double blind them I'm unsure of your conclusions : "the sax had a noticeable harshness which seemed much smoother on the Panasonic boards" ... how is this measured? How do you know you're hearing this? To what degree are your expectations affecting this? Without a proper scientific experiment you cant claim scientific results....... and if scientific results are not what the goal is then why all this measuring?
 
The one and only 9440A that I went through had some wafer switches in pretty ratty condition..ie " Phenolic deterioration " Old single wafer Globe Union/Centralab.Don't know if they were OEM or not. Globe Union used to be one of the "life blood " companys here in town. Until it shut down. Hell they were probably made right here in FD..
 
Last edited:
Hello there, I finally bought an Altec 9440A today, excited as I am, I noticed that the unit had been opened previously, so I opened up the top panel comparing to the pictures of this post, I found that my unit is missing something on top of the two sockets. Could anyone tell me what those are and what part am I actually missing here, please?
Here is a part of my unit:
IMG_9457.jpg

I am attempted to follow along the post to do a recap on this unit, but I am not very familiar with electronic circuits, hopefully it will not be too hard.

Appreciate all the help from everyone,

Jimmy
 
Could anyone tell me what those are and what part am I actually missing here, please?

I'm assuming you mean the two octal sockets to the left of the power transformer in the picture. I'm reasonably certain that they are for balanced-to-unbalanced transformers.

I'm not 100% certain of the following: Unless you want (*) to use the balanced inputs of the amplifier, you do not need transformers. The balanced inputs are three-pin "XLR" connectors. For home use, most people would use the unbalanced inputs, which are common RCA jacks.

(*) By "want", I mean "want very, very much". I think the transformers are quite rare and costly.

HTH,

chazix
 
I'm assuming you mean the two octal sockets to the left of the power transformer in the picture. I'm reasonably certain that they are for balanced-to-unbalanced transformers.

I'm not 100% certain of the following: Unless you want (*) to use the balanced inputs of the amplifier, you do not need transformers. The balanced inputs are three-pin "XLR" connectors. For home use, most people would use the unbalanced inputs, which are common RCA jacks.

(*) By "want", I mean "want very, very much". I think the transformers are quite rare and costly.

HTH,

chazix


Hey there, Chazix

Thanks for the information! I am not looking to use the XLR connectors so it really wouldn't effect me too much in this case. However, I am still interested in looking out for one as an ongoing thing to complete the unit.
I ordered some TSR to RCA cables and jacks last night, hopefully I'll be able to get them tomorrow so I can give it a listen. I also found the light bulbs are all out for some reason, hopefully it's just one of them in a series circuit so I won't have to worry about that too much...
 
Back
Top Bottom