• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Best amp combo for new Magnepan LRS+ speakers?

Fred Quinn

New Member
Very pleased with the Christmas present from my wife. A level of detail and openness that is impressive!
Now looking for some help on getting the most from the equipment I already have.
How can I best use some combo of two integrated amps (NAD 3150 and Rotel RA-870bx) and one NAD 2150 amp to power the pair of 4-ohm Magnepan LRS+ speakers AND a NHT powered subwoofer.
The subwoofer amp would normally allow me to attach the main speakers to it, but it says not if they’re less than 8-ohms. I also found that running the main speakers thru the NHT amp hurt the sound quality.
Ideally, I’d like to use just the two NAD items; amp and integrated amp. Thanks.
 
Register to hide this ad
Not familiar with your NADs. Check out their manuals, if they have any warnings about 4 ohm loads.

Try without Subwoofer to start. I don't know how to advise on how to integrate your sub. If it advises against 4 ohm speakers.

Maybe the 2150 is a power Amp? When you try it out, check the Amp periodically, it doesn't get hotter than normal.

Enjoy your new speakers.

I have 1.7i Maggie's. I power with Bryston BP20 preamp and 3B NRB power Amp.
I have used Rogue Cronus Magnum tube integrated @ 100 wpc.
 
Last edited:
Very pleased with the Christmas present from my wife. A level of detail and openness that is impressive!
Now looking for some help on getting the most from the equipment I already have.
How can I best use some combo of two integrated amps (NAD 3150 and Rotel RA-870bx) and one NAD 2150 amp to power the pair of 4-ohm Magnepan LRS+ speakers AND a NHT powered subwoofer.
The subwoofer amp would normally allow me to attach the main speakers to it, but it says not if they’re less than 8-ohms. I also found that running the main speakers thru the NHT amp hurt the sound quality.
Ideally, I’d like to use just the two NAD items; amp and integrated amp. Thanks.


Of the two, I would try the Rotel first. It's rated for 4-ohm speakers and 80 watts. I would also try the NAD, you may like it better.

Had the LRS, and have Magnepan 1.7i now.

I ran the original LRS with 25 and 50 watt tube amps. Just be careful with the volume controls.

FWIW, I have run some big towers on small amps, just be careful (and smart). They may not play loud, but they may play sweet.

Enjoy those speakers!
 
Back
Top Bottom