• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

magnepan

  1. R

    AMT vs Magneplanar?

    So I just moved into a new space and I'm looking to downsize my speaker collection a bit. Mainly I'm looking to get rid of either my Magnepan MG IIC's or my ESS AMT1C's. I like them both with maybe the magnepans being a tough better? But it's marginal and could totally have something to do with...
    • Rotary
    • Thread
    • comparison ess ess amt ess amt 1 magnepan magnepan mg-iic magneplanar
    • Replies: 14
    • Forum: Speakers
  2. NickDeO

    Magnepan SMG Speakers - A Few Questions for Magnepan Owners

    Hello, I currently have the opportunity to purchase a pair of Magnepan SMGs from a friend for $250. He says there is no noticeable issues with them and that they‘ve been stored correctly as long as he’s owned them (8 years or so). I know these didn’t fare well in hot/humid environments, but we...
  3. F

    Best amp combo for new Magnepan LRS+ speakers?

    Very pleased with the Christmas present from my wife. A level of detail and openness that is impressive! Now looking for some help on getting the most from the equipment I already have. How can I best use some combo of two integrated amps (NAD 3150 and Rotel RA-870bx) and one NAD 2150 amp to...
  4. MarmotDavid

    What to drive new Magnepan 3.7i's

    I've got a new pair of Magnepan 3.7i's. Currently I'm using my older, unrestored Counterpoint SA-1000 tube/hybrid preamp and and old solid-state Conrad Johnson Sonograph SA-250 power amp. The setup sounds pretty good but I'm sure it could be improved with some newer preamp and power amp, so...
  5. P

    Small Tear in Magnepan 1.7i

    Hello all, I recently purchased a pair of Magnepan 1.7i speakers. They sound fantastic and so far I am happy with my purchase. However, I discovered what appears to be two sections of the foil/wire slightly lifted and rotated with small tears in the mylar. The tears do not seem to change the...
    • proto85
    • Thread
    • magnepan magnepan 1.7i magnepan damage repair
    • Replies: 4
    • Forum: Speakers
  6. tritiumglo

    Rogue Dragon VS PS Audio BHK VS Carver 350

    Seeking a power amplifier with a laid back refined top end. Warmth over clinical analytic sound preferred. High power and low impedance stability is required. The amplifier will be used with a large variety of speakers including Magnepan. Top choices right now are the BHK250, Rogue Dragon...
  7. onwardjames

    Damn these Magnepan SMGa's !!!!

    Hello, all !! An Ak'er was kind enough to give me a pair of these legends a year or so ago, with the caveat that there was a sizable rip in the mylar, and occasionally, the tweeter on one with the rip would cut out. After not connecting them for the past year, I got around to it. Yep...
  8. B

    Can anyone help with Magnepan 3.5r external crossover build?

    Hello, all. I am interested in assembling crossovers for my magnepan 3.5r’s. I have no prior experience in Building a crossover. I was told that my post was not specific enough. I will try to correct that now. I was wondering if anyone with knowledge about this would not mind sharing...
    • Brandosees
    • Thread
    • magnepan magnepan 3.5r magnepan external crossovers
    • Replies: 50
    • Forum: Speakers
  9. W

    Magnepan MG-1 Value?

    I am the original owner of a pair of these loudspeakers, and I am wondering what they are worth (?). They have not been used in roughly 10 years and there is apparently a short in one of the speakers (no sound). that said, with the exception of the plain black bases (a few scratches), the...
  10. geneml

    Yes, I'm new here ...

    But I've been on other popular forums as long ago as 2001. I have all vintage gear. Here is a list for the curious, the rest can move-on. :) Thorens TD-124 (early version, rebuilt by yours truly, with a SME 3012 tonearm and Shure M97X cartridge. Paragon 12A tube preamp. So rare most of you...
    • geneml
    • Thread
    • denon magnepan marantz mcintosh pioneer teac technics thorens yamaha
    • Replies: 20
    • Forum: Introductions
  11. D

    M&K Mil-K X1 Bass Extender Worth?

    I just acquired two, no cords, untested, any idea of value to the Maggie crowd? Thanks in advance.
  12. arpod

    Bookshelves? Towers? Panels? Help me set up new living room :)

    So I'm moving into a new house soon and I've been trying to figure out the best way to set up the living room which will be the main listening space. The challenge is that the wall where I would normally set up a media console + stereo is better served by a couch so the speakers have to go into...
  13. arpod

    Vintage Pro Audio vs New Pro Audio

    Hey all I've got a question for you. I'm looking to get a high current amplifier capable of making a pair of Magnepan LRS really sing. I'm trying to do it on a budget and I've narrowed my choices down to: 1) Vintage JBL 6260 - 300w/ch @ 4ohm 2) Crown XLS 1502, 2002, or 2502 I'm most intrigued...
    • arpod
    • Thread
    • crown xls magnepan magnepan lrs
    • Replies: 8
    • Forum: Solid State
  14. M

    How do you buy a Magnepan?

    I decided to pull the trigger on a pair of Magnepan LRS. Put in an "online purchase request" on their site on June 27 and never heard back other than an automated form email. Called the next day to inquire, phones went to voicemail. Called again today, phone goes to voicemail that says to call...
  15. T

    Supplier for Magnepan fabric?

    Anyone know a good fabric supplier to make new socks for MMGs? I'm looking for more interesting colors than the black/white/brown, etc. that were standard. aliexpress has loads of nice colors, but most are 3-ply which is going to be too thick to do a nice job, I presume...
  16. FireGuruMN

    Magnepan MGII Repair/Restore, Glue, Glue and more Glue

    I bought a pair of MGII last fall on CL for $200.00 with known issues. They sat around during the winter because there was no way quality control would allow stinky glue in the house. I once finished off an entire office with Victorian woodwork, built in shelves, wood ceiling and did all the...
    • FireGuruMN
    • Thread
    • capacitor crossover delamination finishing glue magnepan mg2 mgii restoration stands
    • Replies: 21
    • Forum: Speakers
  17. terminalVolt

    Vintage Magnepan Manuals

    I have a pair of MG-2.5/Rt loud speakers AND a pair of SMGs that I'm interested in finding the manuals for, Magnepan's website doesn't have either of them listed and I've only found manuals for the SMGa's online, so if anyone has copies somewhere scan them in for me please!
    • terminalVolt
    • Thread
    • magnepan magnepan 2.5/rt manual speaker vintage
    • Replies: 2
    • Forum: Speakers
  18. rickl

    old and new maggies

    i recently acquired a pair of MG1.6QR. Here is a pic compared to my MG1. While I like the 1.6 more, the older MG1 sound similar and don't give up much. If someone is looking to get into Magneplanar speakers, older ones can be purchased relatively cheap. They most likely will need work but...
    • rickl
    • Thread
    • magnepan magneplanar mg1 mg1.6qr
    • Replies: 9
    • Forum: Speakers
  19. Isaac C.

    Magnepan MG-1 Rebuild Questions

    Hello everyone, a friend just gave me a pair of MG-1s that need rebuilt because they have the usual rattle. After viewing a lot of rebuild threads from various forums, I keep seeing the recommendation to use DAP Contact Cement instead of 3M Super 77. I've seen some people use both and others...
    • Isaac C.
    • Thread
    • maggies magnepan mg1 planar speakers rebuild
    • Replies: 15
    • Forum: Speakers
  20. JimmyEL34

    Bryston 7B3 compared with McIntosh MAC6700 Integrated

    The set up: Power: Two Bryston 7B3 monoblocks (600w @8ohms/900w @4ohms) McIntosh MAC6700 200w @8/4/2ohms (using autoformers) Pre-amp: McIntosh MAC6700 pre-amp stage (output 1 fed to MAC6700 power amp stage, output 2 fed to Bryston 7B3 monoblocks) Speakers: Magnepan 3.7i Turntable ensemble...
  21. A

    Magnepan DWM amp & crossover

    When adding the DWM to larger Maggies, Magnepan suggests adding a 1.4mh inductor and/or resistors to tailor the response of the DWM. The inductor will roll off higher frequencies at about 200 hz, too high imo. Since these parts effectively serve to alter the crossover, I decided to try this...
  22. Johnny_Law

    Can Magnepan Aluminum wires be soldered? Edit: YES! With the right solder & flux.

    Edit w/ answer: YES and my big Weller does it way faster than my smaller Hakko I got away in my previous Magnepan repairs never to have to solder Aluminum, but those days are over. I have an MG-IIa with new wires glued on them which refuse to allow themselves to be soldered into place. I have...
  23. Old Guy8

    Magnepan 1.7i Impressions

    I've had these new Magnepan 1.7i quasi-ribbon dipoles a month. Thought I would post impressions. Not a review. I likely don't have a great ear. A little hiss in ears with alergies/ear issues. Setup in a bright 26' long x 14.5' to 18.5' wide L shape x 7' high finished basement. Vinyl plank...
  24. drrsutliff

    Magnepan 30.7s visit Jacksonville FL

    Last night I caught up with the Magnepan 30.7s and Wendell Diller on their cross continent tour. The demonstration was hosted in Jacksonville FL by the House of Stereo. I have been a long time acquaintance and client of the House of Stereo and had multiple occasions to enjoy their Magnepan...
  25. kjello

    Magnepan 3.6

    Ok So I'm about to close the deal on a pair of mint Magnepan 3.6, they come with a pair of Mye Stands. So I just drop by for any opinion against buying these, as my first pair of electrostats. Are the 3.7 much better? How is the Quad ESL? Any other brand/model I should concider under the 2000...
    • kjello
    • Thread
    • 3.6/r dipole magnepan magneplanar ribbon speaker
    • Replies: 81
    • Forum: Speakers
Back
Top Bottom