Frazier branded EV 15” model #?

[Caryw]

I need to get a dustcap and just for general knowledge, anybody know what EV woofer this is? It is after the Jack Frazier era so the Frazier Group doesn’t have the info.

NAS got them from Frazier.

 

[Caryw]

Looks like a standard EVM 15. Will check measurements and order. EVM 15L to be exact. The real audiophile question is , does the EV logo add extra DB's?

 

[GordonW]

If that's the original cone- it looks like Frazier added a coating on the rear side of the cones.

Can't tell from the picture- is that a pleated fabric surround, or a foam roll surround? If it's pleated fabric, it's probably an EVM15B-based driver. If it's a foam edge, it's probably based on a DL15W.

Regards,
Gordon.

 

[Caryw]

I hate to bump old threads but Frazier definitely coated the rear of the cones on the EV woofers. Never have had them out to get a close up. Used in NAS Studio Monitors

 

[Caryw]

Hmm now the question is , did Frazier or NAS coat the cones cause here are some coated EV’s that are not Frazier branded pulled from Studio Monitors

 

[Basque]

Those Monitors are amazing sounding!

 

[GordonW]

Hmm now the question is , did Frazier or NAS coat the cones cause here are some coated EV’s that are not Frazier branded pulled from Studio Monitors

EV did coat the cones of some drivers they made for OEM applications.

I would assume that if specified, they could/would coat either side of the cone, or both sides.

Regards,
Gordon.