• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

GE 5AR4, any good?

Jenkster

When I had talent
Subscriber
I picked up a 5AR4/GZ34 rectifier tube labeled Hewlet Packard made by General Electric. I assume this is a US made tube? It is a bit smaller than the Mullard 5AR4's I have had. It seems to work fine though I have not had it tested. It is in very good physical condition with decent lettering. Is this a good tube and how does it compare to the Mullards? Oh, looks like the date code is 60-22, older than I am by a couple of months.
 
Last edited:
Register to hide this ad
I think this is what you have. A very nice tube that will give good service.

http://www.tubemongerlib.com/gallery2/v/GZ34/GE+5AR4+GZ34+1965+with+Copper+Sides+-+USA.jpg.html

Thanks bluelobster, that looks like the one. I have been using it in my Scott 299c for a few days now and it's working great. I have a couple/three strong Mullards and I can't tell the difference in the sound.:scratch2: Not bad for being 50+ years old that I got for free!:thmbsp:

Thanks for the links to the old threads Sam, interesting reading. I am pretty much sold on good vintage tubes for most applications.:yes:
 
Back in the vacuum tube era, HP was high quality, and paid top dollar to get top quality components. That should be a very good quality tube.
 
Back in the vacuum tube era, HP was high quality, and paid top dollar to get top quality components. That should be a very good quality tube.

Good point, I had forgotten they are an old company. Nowadays you think of HP, you think computers and the like. Oh, and we can't forget Carly Fiorina, or can we?:scratch2:
 
Nothing wrong with that tube. I have several. HH Scott went to them in later years. I suspect they cost Scott a lot less than the Mullard that they were using for lots of years. Don't let someone sweet talk you out of it. ;)
 
Good point, I had forgotten they are an old company. Nowadays you think of HP, you think computers and the like. Oh, and we can't forget Carly Fiorina, or can we?:scratch2:

Their commercial equipment has always had tank-like build quality, and I assume it still does. I scrapped an HP signal generator this fall that felt like it was made of lead.
 
I am using one of those little bottle GE 5AR4's in my Scott 299A....works very well. Go for it....
 
I have used all kinds of 5AR4 rectifiers.....from NOS Mullards to cheapo Asian versions. I HAVE had arcing problems with cheaper tubes, although the Ruby brand seems to hold up well, even under higher demand loads. It's the ONLY 'cheap' rectifier tube I now use, and in all honesty I'm not sure if these come from Asia, Russia.....or on any given day, only Ruby may know for sure! But, I've NEVER had a problem with any old US made rectifier tube....only 'new' and fresh stock 'imports'. Also, I think application does have to be considered; I wouldn't put a cheap rectifier in a 'big' amp.....lots of current draw and high wattage output. My failures were on 6550 based amps.....so I now use only US rectifiers in those type amps. But, in a small amp.....6BQ5/EL34 type amp.....I think I'd trust most of the imports in a product like that. I'd most certainly trust that GE in most anything! FWIW....Tom D.
 
Who made tubes for Heathkit Daystrom?

Who made the tubes for Heathkit Daystrom?
 

Attachments

  • 04-Heathkit AJ-13 Tubes , original.jpg
    04-Heathkit AJ-13 Tubes , original.jpg
    49.8 KB · Views: 24
Who made the tubes for Heathkit Daystrom?

It would help if there were some closer shots of the tubes. Like of the markings. I do know that Heathkit started using Japanese toward the end of their tube era. If you can find numbers, often it will tell you who made it.
 
Tube Daystrom

It would help if there were some closer shots of the tubes. Like of the markings. I do know that Heathkit started using Japanese toward the end of their tube era. If you can find numbers, often it will tell you who made it.

12AU7A and 6AU6A and the tuner tube is a 312526ELM [6C9 made in USA] I thought Heathkit used Mullards.

The rectifier tubes I use is the Slovac 5AR4/GZ34 in the Dynaco MKIII's with the KT88 output tubes. I had no problems with those Slovac rectifiers , but only after soldering in diodes to protect the tubes from a power surge when turning on the amp.

http://www.audiokarma.org/forums/showthread.php?p=4107948#post4107948
 

Attachments

  • diodes.jpg
    diodes.jpg
    65.6 KB · Views: 15
Last edited:
Back
Top Bottom