HH SCOTT 370R ACC OUT & IN?

[patra710]

I got a Scott 379R receiver and on the back side are jumpers for what it calls acc out and in. I can't find a user manual on this receiver. Any ideas. Thanks

 

[typesix]

Those allow you to add external add-ons like an equalizer, without hogging the tape in/out jacks.

 

[patra710]

Thanks. My first thought was that they were preamp out and main amp in. If I am tracing the schematic right, the out leads to the tape monitor/source switch and the in leads to the stereo/mono switch.

 

[patra710]

After looking at the block diagram, it shows all input signals going through the ACC before any amp sections. And then looking at the audio level diagram I'm wondering why they choose to patch in there. A little different, just wondering why they went this way.

 

[bubbajack80]

After looking at the block diagram, it shows all input signals going through the ACC before any amp sections. And then looking at the audio level diagram I'm wondering why they choose to patch in there. A little different, just wondering why they went this way.

Is this the 379 RS?

 

[patra710]

No it was the 370R. I sold this stereo a long time ago. I still not sure of what these are use for.