is there any way to adjust where my Beogram 2400 lifts the tonearm?

[cherold]

My Beogram 2400 automatically lifts up and returns the tonearm when it reaches the end of the record - about 6 times out of 10. Apparently a lot of my records don't let the cartridge near enough the spindle to trigger the action.

Is there any way to fine tune this? I think if it was just triggered like a quarter inch earlier I would get much better results. I opened up the turntable once to fix the power button but don't know enough about turntables to recognize the part I would need to adjust.

 

[mhardy6647]

short answer: I don't know (someone here probably does).
That said, the service manual's on Vinyl Engine, if you don't have it: https://www.vinylengine.com/library/bang-and-olufsen/beogram-2400.shtml
There is an adjustment described, but it might not be what you need.