• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

beogram

  1. J

    B&O Beogram 3400 counterweight

    Hello everybody and happy holidays! Just got my first B&O device, so I'm pretty excited! But the one I got needs a lot of work! In brief, Santa just gave me a free beogram 3400, that was listed for parts, and it's in very sad condition, with both power and sound cord cut out. I gave it a good...
  2. T

    Beogram 6000 (4002) tonearm not lowering, after replacement transistor issues with oscillating solenoid.

    As per the title I have a beogram 6000 which previously did not have enough power to lower the solenoid. It did try but it would require help from me in order to actually finish going down. I read on a forum that it could have to do with the 1c23 capacitor or the arm circuit transistor. I...
  3. A

    Beogram 5000

    I have just bought a Beogram 5000. Pick up arm for 12"" needs it's drop point adjusting, needs to come in about 1-2 mm to pick up the run in groove. Ok with 7". Service manual not much help, it tells me which screw to turn, just not how to find it. Have removed the platter and lifted the plastic...
  4. G

    Audio Origin or Soundsmith? Rebuilt MMC20EN or New SMMC20EN?

    Hi - Does anyone have any experience with retipping performed by Audio Origin in the UK? (https://www.audio-origin.co.uk/) I've just acquired a Beogram 1700 w/the original MMC20EN and need to get a second cart. I need to decide whether to go with Soundsmith (as I have in the past) or give Audio...
    • GessWurker
    • Thread
    • beogram cartridge replacement retipping soundsmith
    • Replies: 3
    • Forum: Turntables
  5. M

    Bang & Olufsen B&O SP14 cartridge repair

    Here's a challenge for someone. I'm restoring a Beogram 1202. The needle was junk. I managed to purchase a new old stock SP14 stylus, without selling my house! Job done, I thought. Turns out the cartridge had dropped a channel. A replacement cartridge is harder to find than the stylus. :( So...
  6. R

    Gotta Choose: Technics, Denon, B&O RX2

    I need to replace my turntable. I've found the following available locally. I'd like some input from those more knowledgeable than me. Technics SL-QD33 with cartridge and stylus - $100 B&O Beogram RX2 with cartridge and stylus - $200 Denon DP-23F without cartridge and stylus - $75 I have a...
    • RedGary
    • Thread
    • beogram denon dp-23f rx2 sl-qd33 technics
    • Replies: 7
    • Forum: Turntables
  7. J

    Home Theater/Listening Room Advice

    I've currently got the following in my HT (Living Room): Jamo D830s NHT Super8 Sub Paradigm SE Center Denon AVR-X2000 Here are my thoughts. Can someone tell me if I am way off base or if this sounds reasonable? I feel like the Jamos are under-utilized in this setup. I've got this mis-mash of...
  8. J

    Bertram rx2 or Technics sl-q300

    hello all, I am getting back into vinyl after almost 30 years and need some help deciding between two turntables. The two I am considering are Bang and Olufsen Beogram rx2 w/ MMC5 for $150 and a Technics Sl-Q300 for $125. I am aware of the high price of cartridges for the Beogram. I am just...
  9. C

    is there any way to adjust where my Beogram 2400 lifts the tonearm?

    My Beogram 2400 automatically lifts up and returns the tonearm when it reaches the end of the record - about 6 times out of 10. Apparently a lot of my records don't let the cartridge near enough the spindle to trigger the action. Is there any way to fine tune this? I think if it was just...
  10. mnilan

    Need a tech in Seattle area - set up Beogram turntable

    Folks: Got a sweet Beogram turntable but I need to get it properly set up, balanced, etc. Anyone know a capable tech I can take it to? Note: Hawthorne Stereo (where I have gone for decades) does not work on Beograms any more but they were kind enough to help me out with a belt issue. So, I...
  11. _Aristo

    B&O Beogram RX 2 woes

    Hello! I'm new to vinyl collecting and I've come into possession of an old Beogram RX 2 turntable. I've got it hooked up to an HK 490i receiver and Celestion DL6 speakers, both of which work just fine. I play cassettes through a deck connected to the reciever via aux/dad. My problem is...
    • _Aristo
    • Thread
    • bang & olufsen beogram rx2 turntable
    • Replies: 13
    • Forum: Turntables
  12. speedy22

    Beogram B&O TX2/MMC3 Question

    I'm looking to purchase a preamp for use with my Beogram TX2 TT so that I can transfer from LP to CD media. Am I correct in assuming the MMC3 "moving micro cross" cartridge to be basically a moving coil cartridge?
    • speedy22
    • Thread
    • b&o beogram moving micro cross
    • Replies: 4
    • Forum: Turntables
  13. R

    Need help: My B&O Beogram RX2 needs work

    I purchased a Bang & Olufsen Beogram RX2 turntable a few years ago. The needle seems to be working just fine (the original owner replaced it with a new cartridge). The problem is the RCA cable. It is connected to the TT so it can't be replaced easily. One side/channel doesn't work properly (the...
    • rvc1
    • Thread
    • bang & olufsen beogram rca cable repair rx2 turntable
    • Replies: 9
    • Forum: Turntables
  14. Track55

    Beogram 1000 vs Beomaster 900 M

    Hey everyone... I am new here, and I dont know if this question has ever been aksed here..but feel free to tell me so. Ok, so my question: I own a Beogram 1000VF (with a built-in preamplifier) and & a Beomaster 900 M with a pair of Beovox S30. Great set, but I get a very fainted sound while...
    • Track55
    • Thread
    • b&o bang and olufsen beogram beomaster
    • Replies: 8
    • Forum: Speakers
  15. david winter

    Bang & Olufsen Beocenter 7000 doesn't switch to Phono

    Never mind... The phono engages it was just in the record detection.
  16. Jon408

    LOUD turntable hum only after time elapse

    I have a Beogram RX that hums only after I've been playing records for a period of time, and the hum can even start when the turntable has stopped (but it never starts unless the turntable was turning). It is quite loud. I have changed amps and speakers to isolate the problem, and it must be...
Back
Top Bottom