So here's what i decided to try. I figured since i was going to make a circle jig to cut out the holes I might as make two sets and see what i liked best. figure the second set will stick around long enough for me to find another pair of Model 6s to redo!
here's a photo of the circle jig:
here's a photo after the cutouts
two fabrics - a 14 count aida cotton that turned out to be a hair yellower than i thought but acceptable - depending on the white balance and lighting looks tan-beige-slight yellow tint and an 18ct off white linen - which I think looks stellar (similar to old ARs). Decided not to bother with the black backing fabric that the originals had. There was one place where it could have been a little tighter when done and i just spritzed it with some water and let it dry - bingo - tight all around.
here's a pic of the old and the new
And here in my office (at least temporarily until I can come up with better placement - but they sound great even driven with an old sonos amp and streaming via bluetooth.
got to get my old amp and preamp working soon! Nakamichi pre-amp and Dynaco Stereo 150 that I built as a teenager. Otherwise, I may have to splurge.
Cheers...Keith