• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Luxman M-2000 Recap/Repair

Dswankey said:
Cohiba,

Any updates?
Click to expand...
Thank You!!!!!! Need to make out the Output # so I will get to this tonight.

I have been working on a Luxman L-85V (have a Thread)....Just wrapping this up. New Main Caps are in....will update that thread.

M-2000...I just got in the NOS T0-66 Transistors that pop right in. Consolidated Electronics had the Sony 2SA762 (PNP) and RCA 2N3441 (NPN) (sorry..got then all).
 
CohibaJoe said:
Thank You!!!!!! Need to make out the Output # so I will get to this tonight.

I have been working on a Luxman L-85V (have a Thread)....Just wrapping this up. New Main Caps are in....will update that thread.

M-2000...I just got in the NOS T0-66 Transistors that pop right in. Consolidated Electronics had the Sony 2SA762 (PNP) and RCA 2N3441 (NPN) (sorry..got then all).
Click to expand...

I started writing them down when I was taking pictures and I realized they seemed the same as yours. I'm pretty sure the ones I have are original
 
Dswankey said:
I started writing them down when I was taking pictures and I realized they seemed the same as yours. I'm pretty sure the ones I have are original
Click to expand...
Did you write down these? The ones that are installed in MY unit are not the correct transistors. What does Pic1 and Pic2 have in the spots? (2SD427, 2SB557)

Pic1
attachment.php


Pic2
attachment.php
 
Hey Cohiba,

Pic 1
Mine have Toshiba 2SD427 and under that O *5K (top one) and (bottom one) O *7h

Pic 2
Mine have Toshiba 2SB557 and under that O *3J both

Short of taking the unit apart, which I'm not gonna do, this is the best I can do. My vision is somewhat limited when looking at things up close.

I'm 99% confident these numbers are correct on mine and I just double checked too.
 
Thanks to "Dswankey" for verifying the Amp boards. These had been reversed. PNP in NPN and NPN in PNP location. This is why the boards were Toasted.

I will post Pictures to what the correct locations are....I could not find 1 picture of these boards in reference to placement. Now we will have Pictures.

1 Channel is Done...:yes:

On to the next.....
 

Attachments

  • LuxmanM2000w.jpg
    LuxmanM2000w.jpg
    82.5 KB · Views: 96
You must log in or register to reply here.
Back
Top Bottom