Marantz 8b Barrier Strips

[BlackScholes]

I have a Marantz 8b that has some broken metal terminals on the output barrier strips. Does anyone know of where I can find an exact replacement or at least the metal terminals that the internal wiring is soldered to?

 

[dr*audio]

Something like this?http://www.electronicsurplus.com/beau-interconnect-system-vernitron-b21-6-terminal-block-6-x-2-flush

 

[BillWojo]

Isn't Jim McShane the Marantz tube guru? I would contact him for an exact replacement. That amp deserves only the best.

BillWojo

 

[BlackScholes]

Isn't Jim McShane the Marantz tube guru? I would contact him for an exact replacement. That amp deserves only the best.

BillWojo

is he a member here?

 

[BillWojo]

jimmcshane@mcshanedesign.net is his email. I believe he is a member but if you search him on the net it will pull up his website. I highly recommend him as do a lot of other members here.

BillWojo

 

[gadget73]

Jim is a good guy, if he doesn't have the parts he can probably steer you to someone who does.

 

[BlackScholes]

Thanks all, I have reached out to Jim. Will keep you all updated.

 

[kcin]

https://www.curtisind.com/wp-content/uploads/Series-37000-38000-Terminal-Blocks.pdf

Curtis Industries is the manufacturer .. I don't think Jim can help on these- maybe. I have a few for projects and was able to get them as a stock item at the parts supplier. Now they seem to be 8 week wait and minimum order from digikey.

 

[x3workshop]

Isn't Jim McShane the Marantz tube guru? I would contact him for an exact replacement. That amp deserves only the best.

BillWojo

Jim is the HK Citation II guru, but he may steer you in the right direction. You should also try Audio Classics.