• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Marantz SD 9000 Compudeck Problem

2 seconds play came out to be a bad connections of the optocouplers. Can play now without stopping but still review with 2sec then stop and recording not functional. One channel not working came out to be a broken wire coming from the heads, a problem that is commonplace in the pioneer CT-F?? series. Several other issue to take care of. Function commands not working was bad tactile switches of FF, Rev, pause and rec. Had to change all. On Ebay I get tactile switches 6x6x8 mm, an easy repair. On pioneer CT-Fxx series it usually bad solder at the connectors on the PSU
Playback slowing down after a few hours and meter going bananas. While being at it, will Probably put new belts, changed it's been a while, some oil where needed, and of course, calibration. in the mean time, I need to figure out the 2 sec only with REV. This unit was basically dead.
Thanks for the Tips. Very grateful, but not dead.
 
noiseseeker9 said:
2 seconds play came out to be a bad connections of the optocouplers. Can play now without stopping but still review with 2sec then stop and recording not functional. One channel not working came out to be a broken wire coming from the heads, a problem that is commonplace in the pioneer CT-F?? series. Several other issue to take care of. Function commands not working was bad tactile switches of FF, Rev, pause and rec. Had to change all. On Ebay I get tactile switches 6x6x8 mm, an easy repair. On pioneer CT-Fxx series it usually bad solder at the connectors on the PSU
Playback slowing down after a few hours and meter going bananas. While being at it, will Probably put new belts, changed it's been a while, some oil where needed, and of course, calibration. in the mean time, I need to figure out the 2 sec only with REV. This unit was basically dead.
Thanks for the Tips. Very grateful, but not dead.
Click to expand...
Hello,
I'm new to this forum and I apologize if my request isn't accepted. Would you be so kind as to send me a copy of the Marantz SD 9000 DBX owner's manual?
Thank you very much.
 
You must log in or register to reply here.
Back
Top Bottom