MCS 6502 turntable tone arm adjustment screw?

[rsingleton]

Does anyone know where the adjustment for the tone arm heigth is? I'm a BIC guy, but got interested in the MCS 6500 and 6502's recently and just got a 6502 from eBay, so I don't know alot about them.

 

[Dan ʕ•ᴥ•ʔ]

The VTA was fixed on several of the Panasonic/Technics sourced tables. But who knows, yours may be one of the ones that isn't.

 

[rsingleton]

It isn't bad, just bumps the tone arm rest when coming back to rest. Put a little heaver cart on it, that could be problem.

 

[Hifirob2]

The small curved plastic 'bar' that lifts up the tonearm should be adjustable. There should be a small flathead screw in it. If you press down the bar on both sides of it with two fingers of one hand, you can then adjust that screw - either to raise the tonearm height, or lower it, with the other hand.

 

[rsingleton]

Hifirob2, you're the man! Thank you for the advice, it worked great!!

 

[Hifirob2]

You're very welcome. :thmbsp: