Mission 770 Speakers

[Lamar]

The picture is from boza. I have yet to change the cap in my 770. You can start a conversation if you like.

Thank you..Boza responded

 

[dgb02]

I acquired a minty pair of 770's a few months ago from the original owner. White face, translucent cone edition.

Can someone advise me on the crossover removal process? Is it jut the 4 screws surrounding the crossover, or does the woofer need to come out? Any gotchas?

I'd like to recap these before I decide whether to keep them or not. Thanks!

 

[boza]

I acquired a minty pair of 770's a few months ago from the original owner. White face, translucent cone edition.

Can someone advise me on the crossover removal process? Is it jut the 4 screws surrounding the crossover, or does the woofer need to come out? Any gotchas?

I'd like to recap these before I decide whether to keep them or not. Thanks!

The 4 screw's go through the board that the crossover is assembled on and have small nuts and washer's on them so you will need to remove the driver.