• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Mono Tube Equipment value

Register to hide this ad
I mean, there are mono amps that are worth over $10k, and there are mono receivers that are worth $50.
 
Don't forget to check out the value of the tubes inside also they can easily be worth more then the gear there in, I have snagged some pretty nice Mullard long black plate D getter 12AX7 tubes from mono gear before one at a time Pilot, Knight, Voice of Music all used Mullard tubes along with other brands.


Regards Snow
 
Don't forget to check out the value of the tubes inside also they can easily be worth more then the gear there in, I have snagged some pretty nice Mullard long black plate D getter 12AX7 tubes from mono gear before one at a time Pilot, Knight, Voice of Music all used Mullard tubes along with other brands.


Regards Snow

I call that the Easter egg surprise.
 
Poultry is right and they don’t even need to be the same brand/model. For example I have an HH Scott 99C and a Bell 2335, each a mono 6l6 integrated with very similar design. I run them together in stereo and you cannot discern one from another sound wise.
 
If you want to listen in stereo, mono preamps are not convenient. FM is actually quieter in mono and you can get a mono Sherwood 3000 with nice tube sound well under $100. Records are also quieter in mono but you would need a mono pickup to listen with a mono preamp. Gear that old usually needs work.
 
To me, the value of mono tube amps depends on whether or not there are two examples of said amp available. If there's only one amp available, the value (to you) goes up if you happen to already have a single example of said amp. Mono has its places, but I prefer having two channels available. Using two mono preamps for stereo can be a pain, but some were made to be converted to two channel use (Dynaco PAM-1, Heathkit SP-2A) using add-on adapters.
-Adam
 
I bought a lot of mono amps over the years but never receivers or tuners (unless w/ MPX out). Might pass on integrated amps too but sometimes did depending on rarity.

My buying was driven by whether or not the gear could be used in a stereo system. With a mono amp you were halfway there and you'd find another eventually.

/they made more than one...

I like that Pioneer though, early Japanese Space Age vibe. Back to your question, @EastPoint nails it.
 
The Pilot receiver appears to be a real quality piece , lots of iron and 6L6 outputs. The Pioneer is cool!
 
I passed on a real nice Sherwood mono tube tuner recently I wanted to match with a little tube integrated amp I have but I passed. In hindsight I am wondering if I paired that with an aftermarket or Sherwood MPX adapter would I have "true stereo" FM?
 
I passed on a real nice Sherwood mono tube tuner recently I wanted to match with a little tube integrated amp I have but I passed. In hindsight I am wondering if I paired that with an aftermarket or Sherwood MPX adapter would I have "true stereo" FM?

Yes you would. You should see an MPX out jack that can go to a decoder. Vintage tube decoders are scarce and some are expensive. These solid-state decoders work well: http://fmmpx.com/
 
Back
Top Bottom