Gday,
complete newbie to this whole forum.
I was wondering if anybody had an idea on the platter dimensions for a pioneer spl-110. acquired one through my partner grandmothers estate and trying to get it running again although platter has disappeared... hence planning on making one with acrylic and cnc machine.
Obviously 300mm outer diameter, I believe after doing a quick calculation the inner hub should be 200mm?
although I don't have depths etc
looking at the spindle hole it has a taper from roughly 9mm to 7.2 approx.
I've attached a rough pdf mark up.
complete newbie to this whole forum.
I was wondering if anybody had an idea on the platter dimensions for a pioneer spl-110. acquired one through my partner grandmothers estate and trying to get it running again although platter has disappeared... hence planning on making one with acrylic and cnc machine.
Obviously 300mm outer diameter, I believe after doing a quick calculation the inner hub should be 200mm?
although I don't have depths etc
looking at the spindle hole it has a taper from roughly 9mm to 7.2 approx.
I've attached a rough pdf mark up.