• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Piezo-Azden-Acutex Thread

great to see a close up pic :thmbsp: I think quite a few of these stylus are probably pseudo elliptical at best unless they are new old stock and branded as a manufacturers replacement. I'd be interested to see what the cheap generics look like under a scope in comparison :scratch2:
Hope it sounds ok though. I can just make out a little dot of light at the very front of the tip's point which might be a reduction of the sphere to an oval...but it could just be wishful thinking (or tired eyes)...
Stilll at least you have a chance to give it a listen now :thmbsp:

It's a NOS stylus, got that lovely 2-piece cantilever, so, unless it was a manufacturing screw-up, it is what it supposed to be. I'll definitely report back after a listen. (I should also have my YM-320 for the Spectrum, from Musonic (UK) Ltd., in a day or three. I'll report back on that too.

John
 
Last edited:
It's an NOS stylus, got that lovely 2-piece cantilever, so, unless it was a manufacturing screw-up, it is what it supposed to be. I'll definitely report back after a listen. (I should also have my YM-320 for the Spectrum, from Musonic (UK) Ltd., in a day or three. I'll report back on that too.

John

Cool pics, here's hoping, by the look of the 2nd photo that is one of those bi-radial cuts aka pseudo elliptical?

How is the channel balance of the cart? Those impedence measurements are just a little more off than usual :headscrat
 
Cool pics, here's hoping, by the look of the 2nd photo that is one of those bi-radial cuts aka pseudo elliptical?

How is the channel balance of the cart? Those impedence measurements are just a little more off than usual :headscrat

I haven't mounted it up yet. I think I'll wait for the YM-320 to arrive and check them both out more or less back-to-back. I agree that the DCR is sorta screwed up. We're looking at about a 6.5% difference. I guess it could be worse.

By the way, I added a couple of pictures to the earlier post, a side shot and a shot of the cantilever where the two sections are joined (with pretty blue glue :)).

John
 
"Scope Shots", YM-320

Here are some shots of the YM-320 stylus I got from Musonic on Friday (GREAT service). In this one the faceting is easier to see in the front view.

I think my problem has been low batteries in two of the three lights on my rig. I'll replace them and look at both again.

John
 

Attachments

  • Piezo YM-320 001.jpg
    Piezo YM-320 001.jpg
    18.7 KB · Views: 112
  • Piezo YM-320 002.jpg
    Piezo YM-320 002.jpg
    19.8 KB · Views: 112
  • Piezo YM-320 005.jpg
    Piezo YM-320 005.jpg
    20.8 KB · Views: 106
I'm right at the beginning of giving my Spectrum SC212E/YM-320 its first listen. Too soon for any detailed conclusions, of course, but I really like what I'm hearing!

Listening to the Charles Lloyd Quartet "A Night In Copenhagen" Blue Note BT85104. The thing I'm struck by most is the beauty and clarity of the amazing Michel Petrucciani's piano and the richness of Palle Danielsson's bass.

Wonder what'll happen when the stylus breaks in. More "tripole magic"? I think this one is a keeper!

John
 
Hope you're still groovin' to that tripole sound. Don't worry about the DCR (not impedance, which is different) being off a little. It's more important that the inductance matches, and it does.

The photos of the 308 stylus sure look like a conical, but I've learned not to reach any conclusions until there are lots of views available. The elliptical cuts on the 320 are visible, however.
 
Hope you're still groovin' to that tripole sound. Don't worry about the DCR (not impedance, which is different) being off a little. It's more important that the inductance matches, and it does.

The photos of the 308 stylus sure look like a conical, but I've learned not to reach any conclusions until there are lots of views available. The elliptical cuts on the 320 are visible, however.

Yup! Still, chillin', chillun!

I've moved on the the YM-308 now (the one with the mismatched DCR) and it's fine. A little boomy and unfocused in the bass department but we'll see whether I can sort that with VTA or maybe it'll sort itself.

And, it sure does look like a conical, doesn't it? In fact, that may account for some of what I'm hearing.

John
 
Hey, Walt - or anyone familiar with them - are those "unguarded" 707-DE styli that Gary sells what we need for the YM-308 tri-poles?

John
 
Yep, got one in my 308II right now. They're the gray ones, right? I also have the guarded yellow ones with a little sticker that says STEREO. The cantilever and diamond look much the same. 4x7 cut, little flats are the only clue that it's an elliptical.
 
Yep, got one in my 308II right now. They're the gray ones, right? I also have the guarded yellow ones with a little sticker that says STEREO. The cantilever and diamond look much the same. 4x7 cut, little flats are the only clue that it's an elliptical.

Thanks! Apparently they come in lotsa colors, what with all the different brands they appear under. Glad to know they're the right thing. For $14.00 I should get one.

By the way and as you may know, JICO makes a stylus for these but it's a conical. They sell it as fitting the Akal MS-100, Hitachi MT-103, Kenwood V45, Piezo YM-308 and 308/II, the usual suspects (but with different prices in some cases). I wonder whether they could be convinced to make an elliptical version.

John
 
Last edited:
By the way and as you may know, JICO makes a stylus for these but it's a conical. They sell it as fitting the Akal MS-100, Hitachi MT-103, Kenwood V45, Piezo YM-308 and 308/II, the usual suspects (but with different prices in some cases. I wonder whether they could be convinced to make an elliptical version.

John

They are trying to expand their business........:yes:
 
They are trying to expand their business........:yes:

"Hello -

"I notice that you offer a replacement stylus for the Azden/Piezo YM-308 and YM-308/2 as well as for the versions of this cartridge made for Acutex, Akai, Kenwood, Hitachi and others. It appears, however, that it's only available as a conical stylus.

"These induced magnet cartridges have been sort of rediscovered by audio enthusiasts. Prices have risen significantly and the original styli have all but disappeared. These were originally offered with an array of stylus options from bonded conical to bonded elliptical to nude line contact. Since these original styli are virtually impossible to find and since you already have the conical stylus available, it occurs to me that offering an elliptical version would be simple to do and, though less simple, an SAS would be possible.

"Is there any chance that you might consider offering such styli? I know that they would be most welcome. Thank you for considering this possibility."

John
 
The elliptical or even hyperelliptical wouldn't be a problem, but it would be a paradigm shifter to do an induced-magnet SAS.

Still! they've gotta do it sometime-- all the ADC people are bunched up, waiting, and that's just one group.
 
The elliptical or even hyperelliptical wouldn't be a problem, but it would be a paradigm shifter to do an induced-magnet SAS.

Yup! For an elliptical or an HE all that would be needed is a different stone on the end of the existing cantilever. The SAS would require a whole new cantilever that couldn't just be borrowed from another SAS.

Still! they've gotta do it sometime-- all the ADC people are bunched up, waiting, and that's just one group.

Yeah and once they did one, the process of doing the other would be somewhat simpler.

John
 
And since the present SAS canti is already a two-piece, it wouldn't be too much trouble to slip on a soft-iron (or dare we hope for an amorphous alloy) sleeve. But the pivot would have to be redesigned. And Mickey Mouse ears added. So not an easy job.
 
And since the present SAS canti is already a two-piece, it wouldn't be too much trouble to slip on a soft-iron (or dare we hope for an amorphous alloy) sleeve. But the pivot would have to be redesigned. And Mickey Mouse ears added. So not an easy job.

The ears appear to be swaged onto the sleeve so I think that would be relatively simple for the SAS. The pivot might be fine on the existing YM-308 conical. Don't know about the ADC though.

John
 
boreas said:
The ears appear to be swaged onto the sleeve so I think that would be relatively simple for the SAS. The pivot might be fine on the existing YM-308 conical. Don't know about the ADC though.
You're right. The Piezo 308 stylus is a wire-tensioned affair very similar to the SAS. There's even a tiny slot-head adjusting screw in there. So all you'd have to do is slip on the permalloy or whatever sleeve, then slip on the "ears".

Since you got me all inspired (dangerous at my age), I got out the the magnifier and found that the "ears" are pushed (and held) against the foam donut by a clear plastic collar. Looks like a jam fit. No swaggeration seems to be involved. Take a look and see what you think. This could mean the whole thing's adjustable if you know how to loosen and tighten the plastic collar.

ADC's style of stylus would be a different story for the SAS people. But that's another thread.
 
You're right. The Piezo 308 stylus is a wire-tensioned affair very similar to the SAS. There's even a tiny slot-head adjusting screw in there. So all you'd have to do is slip on the permalloy or whatever sleeve, then slip on the "ears".

Since you got me all inspired (dangerous at my age), I got out the the magnifier and found that the "ears" are pushed (and held) against the foam donut by a clear plastic collar. Looks like a jam fit. No swaggeration seems to be involved. Take a look and see what you think. This could mean the whole thing's adjustable if you know how to loosen and tighten the plastic collar.

ADC's style of stylus would be a different story for the SAS people. But that's another thread.

But an SAS for my Integra would be very hip, daddyo! :beatnik:

I'll have to check the ears out the next time the cartridge is rotated out..... and with improved light after the last time.

I've decided I probably like the YM-308, certainly enough to spend $14.00 with Gary. ;) After some hours of use the bass is resolving. It's still quite pronounced but less diffuse than initially. Mids are quite nice too. Highs are clear and not harsh or brittle. It's actually a lot of fun with the right music, much like my XV-15/350 but with a bigger soundstage.

John
 
Last edited:
Goofy bass, huh? If that keeps up, I wonder if your tension wire could be loose. Get a couple of these styli (in case of oopses) and see what tightening the wire (n.b., I'm only guessing that's what the screw is for) does. If I can find a screwdriver small enough..

Shortening the SAS canti to the length of a typical Pritchard (ADC) design would maybe make it possible to do the whole thing in boron. What fun!
 
Back
Top Bottom