Power amp upgrade? Or should I?

[ab1962]

Hi All,
Source is a Dynavector 10x5, SME series II improved with FD200 fluid damper kit on a Systemdek IIX with external PSU. I also have a Rega fono stage, Quad 34 pre amp, Rotel 960 BX power amp and Rega ELA speakers.

I think a Quad 909 could represent a good step up from the Rotel power amp, but wonder if the Quad 34 or the Rega's are up to it?

I am also thinking of Naim SBL's or Linn Kaber speakers? Would the 909 suit these, can the Rotel drive them? are they better than the Rega's? Anything else I should consider?

So many questions. All comments welcome. Thanks, AB.

ab1962

 

[KentTeffeteller]

Quad power amp needs the Quad preamp paired with it for best results, as it needs higher gain than normal.

 

[ab1962]

I have the rega Fono stage going into a line level input on the Quad 34, so that's ok, yes?

 

[Rex Aeterna]

your preamp is fine.

 

[KentTeffeteller]

Your phono stage is fine.

 

[ab1962]

Thanks to all. So by way of an update I am looking at the Power amp. The Rotel will apparently struggle to drive Naim SBL's or Kabers but the Regas will sound better with upgraded power. So upgrade the power amp this Christmas and who knows what we can do next Christmas.

So what Power amp? Up to £500
Quad 909 / 606 or Linn something? Other?