rega

Hello! I am new here, I know this has probably been asked a million times but i am looking to upgrade from my cheap Victrola Turntable (I am aware its not great) to Something better as i slowly upgrade my setup from all ultra-budget to something far better. My current contenders within my budget...

Hi, I am just about to pull the trigger on a new Clear Audio Concept. It's my first audiophile level table, and I wanted one that would play 78's as well. I'm a bit concerned because some people say it's not really designed for 78s and others that it's difficult to switch out the cartridges. I...

I recently purchased a Rega Brio mk7 after getting a new pair of fairly efficient speakers (Paradigm Premier 800F). I was astonished by how good the speakers sounded with my amp, an original Rega Brio mk1 from the early 90s. And so I plug in the Brio mk7 and proceed to do my normal listening...

Howdy aficionados, I'm looking to upgrade from an old Rega system (Rega Brio clamshell, Rega Kyte speakers and Rega Planar 2). I tried the ELAC Debut B6.2 with the Rega Brio clamshell, and although they gave a tiny bit more bass extension compared to the Kytes, it still wasn't there quite yet...

First time posting, thanks for having me! Chasing some info on these, have done a reasonable amount of googling with no specific answer so far. I'm trying to figure out exactly what model these Camber's are (see photos). I wish they still had their original stickers! Found them at my local...

I bought my son a turntable, entry level AT-LP60X - he's getting right into it! It's not horrible but speed is off and the adjustment screws are far too sensitive and hard to access. I got thinking about motor control and decided to try to build my own. Maybe I will waste money and time and...

Hi, I just purchased and installed this counterweight: https://tng-spinner.com/products-detail.php?id_pro=44&producto=STAINLESS%20STEEL%20UNDERSLUNG%20COUNTERWEIGHT This is a new product, another alternative to the aftermarket counterweights offered for Rega tonearms. In particular, i wanted...

Hi everybody. I bought an Incognito Rewire Kit for Rega some time ago, and now I will install it on my Rega Planar 3. But I noticed that the thin wires that go to the cartridge don't have the metallic connectors. So where can I find a good quality of this pieces that will fit the Incognito...

I am curious if anyone has modified this phono pre-amplifier. Specifically op amp, or capacitors? if you have, I’d love to hear about it

Hi there - new to this wonderful world of vinyl and learning a lot as I go. This just popped up on my local buy n sell and I’m wondering if it’s worth pursuing for $300. I can’t tell what’s original or what’s been replaced through the years, things to look out for, common issues, etc. Hoping...

Found one of these secondhand for 170,- without a needle. Has a cartridge. Good deal or not? https://www.hifix.co.uk/rega-p2-turntable-black

Dear all, I'm looking for an integrated amp (to pair with new Rega Planar 3 Exact), and in my budget range I can choose between a new Rega Brio for around 700 euros, or there is someone living near me selling an older Rega Elicit for around the same price (incl. MM preamp) and that is claimed...

Hey! So I’m new into this world and I was looking into buying a TT, my first option was the Pro-Ject Debut Carbon Evo, but after reading so much negative opinions about it in this place (I still having read a solid opinion on why is a bad TT) I decided to look at other options. To put into...

So I have an original Lehmann Black Cube (from early 2,000’s) with standard wall wart peer supply. I have 2 Rega TT’s, an older 3 with Goldring 1042 MM & new P6 with an Ania MC. The P3 w1042 plays quiet but I’m getting a 60 hz hum through the P6 Ania (yes I am adjusting the dips for MC). I...

I use Sony TA-F555ES amp, which I think was once a very good amp, and which I love myself as well. It's time to send it in for some revisions (the wheel to choose between A or B speakers needs to be checked), but there is another issue that I'm not sure I should have the guy look at: the phono...

speaking from a longevity and manufacturing quality point of view, or lack there of. owner complained of intermittent operation and eventually dropping out. not to mention the missing rca jack negative/ground. single sided for soldering, mostly, even though traces on both sides of the pcb...

Hey all, I recently acquired a new model Rega p3 with elys cart. Currently I have a 70's pioneer sx535, good receiver, but i think might be holding the power of the TT back a bit? Anyone have recommendations for receivers that go well with regas?

Hello, Im thinking of purchasing a new planar 3, however the seller said that the original power supply that came with never worked. Instead he is providing a Swagmanlab audiophile linear PSU, like the one below: http://www.swagmanlab.com/Product_All?product_id=664 My question will this matter...

Hello all, I have an RP6 with an RB303 arm and Neo PSU. I'm getting a lot of noise in the right channel only, through my tube amp. I have traced the noise to the right channel of the table. No change in the noise if I unplug the power supply, no change in noise if I try to touch a ground wire...

Hey friends - I have recently come across a vintage Rega Planar 3 with rb300 tonearm for $500. Does not include cartridge which im fine with as i have an ortofon blue. Would you guys say this is a good/fair deal?

Hey everyone, new user here. I’ve been lurking and reading for a bit and I’m finally taking an initial leap into a set-up, but trying to do it on a budget. So, my medium term goal here is the following: - Fluance record player (have it) - Tube Amp - Streamer (I’ve got my eye on the new Node) -...

Hey guys, just wanted to get some opinions here, any input would be greatly appreciated. My current set up is a pioneer sx-535 receiver, pioneer cs-500g speakers, and technics sl-3200. Where should I go from here for the biggest jump to upgrade sound? I feel like the synergy in my set up is...

Morning all long time reader, and although a member of a couple of other forums, not joined AK until now. Thought it was about time! Am retired and just getting back into hifi after quite a few years where I seemed to just ‘make do’ with kit. have always had a TT but have to say not using it...

I bought my Rega RP1 used in 2013 and it's now running a little slow at 32.xx rpm (and the belt seems overly slack). I thought it would be easy to order an standard black belt through Amazon.ca or eBay, but I'm not finding a ton of authentic belts available. Is $33.40 CDN a fair price? Has...

I got an RP1 maybe a month ago to replace an old Kenwood (Kd-5070) and I'm contemplating the next move. I see there are tons of upgrades you can do to this baseline Rega but I'm really wondering if I wouldn't be better off trying to sell or trade both of these and rolling that into an RP3 or a...