Rewiring Rega RB250 Tonearm

[tabarddn51]

Hi, Bit late, but better than never.
This is how I rewire my Rega's when I get them in part exchange. A 3mm dia hole it the top & take the wire out there. Going at a tight right angle does nothing for the tracking ability. Also makes later wire changes a breeze, like 5 minutes work.

Cheers

 

[LP-THORN]

When I rewire regas, I always cut the black ground wire from the return of one channel, and run a separate ground wire.
Think it sounds slightly better this way.