Shorted out CR-820 when installing LEDs; won’t power up!!

[shport]

Found a sweet CR-820 that needed new LEDs. In the process of figuring out the wiring order, I let a connection make contact with the chassis and it shorted out. Now it won’t power up.

Before I look for a service tech, any ideas on where I would check for an issue, first?

PS - I’m such an idiot. I know. Careless mistake.

 

[arhargi]

Check for any blown fuses.

 

[MACKIE1975]

At least, you should provide a schematic and highlighted the LED that created the short.

 

[Sparkplug]

I believe there’s one power indicating LED and the rest are 12V 60mA lamps. Please find a technician before something irreversible happens.

 

[mbz]

Check for any blown fuses.

Fuses F803 or F804

 

[shport]

Turns out if was the fuses. I was able
to order replacements and rescue this beautiful CR-820 and finish the LED install. Also reconditioned the case and it’s looking beautiful.

Going to enjoy it for a week before shipping to my brother as a gift. Thanks all!!!