• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Show me your workbench!

A work bench is a work bench. I can only dream of having that much space.
Yeah, you ain't kidding. Even with my nicely sized basement shop I was always bumping into things.
This dude even has room for a car in there!
I'll admit, I'm very jealous!
 
You can get 'em on Amazon for $20 for five, or at least you could, price has probably gone up just like everything else it seems.
 
I've put them on a number of chairs we own and they work great. Lots better than the small wheeled plastic ones shown on your chair.
 
I intend to be careful about this. I have already learned I have to turn off my fluorescent shop light to eliminate noise into a sensitive receiver. That light even produced noise into a Tek scope I had apart and was repairing. That noise drove me crazy until I realized it was the light. Probably will have to do the same with an LED shop light I have added for additional lighting. Old eyes sigh.....

Lord. I spent this weekend trying to track down noise on my Rigol while working on a pioneer. I didn't even stop to think it might be my new led shop lights. But drove myself crazy...
 
one of my workbenches:

View attachment 3412233
Living in the inner city, space for a workshop is at a premium, so I belong to a maker space that has a woodshed, metal shop, paint booth, CNC, 3d Printing, laser cutters, fabric workshop, jewelry studios/benches and individual studios.
My bench at home in my 1300 square foot inner city condo is a bit less spacious.
IMG_1832.jpeg
 
Any update on this situation?
I installed a set each on the lab chair and the Aeron in my office. They glide much more easily than the stock casters on my carpet, however the posts don't have the slight flare on the bearing end that keeps them centered/plumb in the holes of the base when inserted so there's a small amount of play...in practice it doesn't seem to cause any problems.
 
The current state of the “No, there’s no room for a workbench in here” situation.
View attachment 3434251
I hope no one sneezes while your at your Bench. :oops:
I really can't talk though. I'm crammed into a small space. My work area has just enough room for a large receiver. I'm glad I don't work on receivers. :biggrin: I added pine planks from one tall shelving unit to another across the top of my bench and they're now crammed full of stuff too.
 
My are is cluttered with several small things, need to figure out better organization for all of the small things you need. I built this bench, it’s about 12 feet in length, using wood and steel and finished with a very hardy poly. Unfortunately the ceilings are only at about 6’ 6-1/2” and I’m 6’3”, but at least I can stand upright.

IMG_6141.jpeg

IMG_6142.jpeg
IMG_6143.jpeg

In the back corner it a stack of drawers for extra caps, transistors, diodes, etc, etc.

IMG_6144.jpeg

The entire room is lined with shelving to hold all of the extra stuff. I have an OCD thing about buying in bulk. Example being here is a row of D5, row behind it is F5, then DE-OX-ID, and a few other cleaners.
IMG_6146.jpeg


Dan
 
Back
Top Bottom