• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Show me your workbench!

I thought I would share mine, even though not complete. Moved from Tennessee to Arkansas almost 5 years ago, and built this last summer. Hopefully I'll find the time to get my test equipment setup and actually use it to work on gear. I would say 36" depth is minimum if you have the space.
 

Attachments

  • 20200629_165008.jpg
    20200629_165008.jpg
    105.6 KB · Views: 125
  • 20200712_162341.jpg
    20200712_162341.jpg
    109.2 KB · Views: 116
  • 20200721_165301.jpg
    20200721_165301.jpg
    92.6 KB · Views: 118
  • 20200913_202030.jpg
    20200913_202030.jpg
    138.3 KB · Views: 120
Last edited:
E04BFEDB-0A72-4C27-B72E-15421203771A.jpeg Here is mine. Toolboxes are full, the top is 1/2” glass that someone threw away I had it cut to fit the top which is an old solid door. Bentwood chair from the trash. The lamp is a tail rotor driveshaft from a Bell 230 which is timed out but new they cost 40,000 dollars and are good for 5000 hours. My other equipment is on a bookshelf behind me.
 
yup. L to R are Fender Blues Jr., Gibson Varitone GA-80T, Gibson Vanguard GA-77 , Vox VT 40+ .
 
Last edited:
Yes I know this is an old thread, But I like it!

This is my work area. It is part of my mancave hangout which includes a quiet basement hangout area. I work on vintage televisions and radios primarily. I also do repairs on hifi gear + build tube gear as a labor of love.

It isn't the fanciest, and is sort of a mess, but I do get many projects done down there. Have to get some photos of my wood and metal shop which is offsite and used far less.

Favorite gear in my shop: My 2000s-era HP test gear which uses HPIB interface bus and outputs data to any Windows machine.IMG_0120.jpeg
 
well...you know everything has a 2nd purpose but the units to the left are basically for aligning tuners. i never wanted to go down that rabbit hole but i'm part way down it.

whattaya do?


:dunno:

You're not too bad off yet!

I've got four separate benches going, each for a specific type of electronic work; RF, SS, Tube, and one for the big-heavy-messy stuff.
Then there's the cabinet-making, machine shop and garage. Good thing the GF owns her own house, otherwise I'd be sleeping in the bathtub....
 
Those in glass houses, Brother:biggrin:
Yeah Art, I`ve read your multi descriptions of you`re multi-decades of acquiring and hoarding of all manner of HQ test equipment, I pale by comparison, basements are not practical in FL. !

I was heading down that path decades ago, but had no more room for infrequently used, but ultra cool test equipment desires, thus the curtailed collecting desire, climate controlled storage rental ain`t inexpensive in my neck of the woods, my Northern Latitude located A/K friend !
 
well...you know everything has a 2nd purpose but the units to the left are basically for aligning tuners. i never wanted to go down that rabbit hole but i'm part way down it.

whattaya do?


:dunno:
Stay away from FM tuner service/alignment !
My local FM market has sucked since 1992, thus no incentive to even use what RF test equipment I already possess !
 
Electronics version :

mi7zOb-D76-quick-measurement-setup-20-08-2022.jpg


Guitar Setup version :

19100511375225019416443911.jpg


Model Trains TLC version :

64bZSb-LIONEL-262E-restoration-11-10-24.jpg


T
 
Back
Top Bottom