• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Show me your workbench!

As I add stuff and move stuff around I can't help thinking this is never going to end. I have 4 years to go before I give up the day job and all my time will be riding and flipping audio gear
View attachment 2099855

I turned 60 last year and hope to hobby this into the retirement years. The real job? Another four or if the health holds out a few more.
 
Nice layout there Tammy63. I bought that same audio generator as you have there. It works very nicely. It measures a pretty low distortion level. I sure like the idea of kitchen cabinets. My parts are all on gorilla racks.
 
Last edited:
Everything messes up the AM band, some lighting messes up the FM band. I have a nice magnifier light that totally wipes out AM and FM when turned on, someday I may take it apart and see if I can do something about it.

Tom

Is it possible to filter that noise ? Ferrite or some filtering at the lights AC wire ? Or is a radiation that interferes with the equipment ?
 
I intend to be careful about this. I have already learned I have to turn off my fluorescent shop light to eliminate noise into a sensitive receiver. That light even produced noise into a Tek scope I had apart and was repairing. That noise drove me crazy until I realized it was the light. Probably will have to do the same with an LED shop light I have added for additional lighting. Old eyes sigh.....
Many fluorescent fixtures produce wideband rf noise due to faulty ballasts. Some manufacturers are aware and helpful about replacing them.
LED noise is usually caused by the switching power supplies.
 
Many fluorescent fixtures produce wideband rf noise due to faulty ballasts. Some manufacturers are aware and helpful about replacing them.
LED noise is usually caused by the switching power supplies.

Yes, it is not necessarily noise going back into the AC line. It can radiate right from those bulbs down to your workbench. When I am measuring low signal levels I have to turn off the lights to get a clean signal. An inconvenience but not that much. At least I know where that noise is coming from.
 
Definitely radiating. I found about 6 fixtures in a bowling alley interfering with a cell tower about 200 feet away. Manager of the bowling alley thought I was nuts-especially when I told him he would have to disable them ( or meet the FCC). It’s pretty common and usually very wideband.
 
It's a start.. I took over the spare bedroom. That's a Tectronix 2235, An AG2601A Audio Generator and a Fluke 8808A on the shelf. A DBT and dummy load over on the left . A couple of hand held DMMs and a Weller soldering station. And a couple of drawers full of hand tools, cables and leads etc. I have a 48" light fixture hanging just out of the picture over the bench.




20210202_195654.jpg
 
I couldn't wait to get started rebuilding my Pioneer SX-1050. My workbench is in the garage but it's below zero out there lately. Moved to the kitchen table but quickly ran out of room. Things flowed over to the counter and I lost the use of my sink under a board. A friend suggested I clear the seldom used desktop computer and printer off a desk and make better use of it.
I still can't use the kitchen table but I have my sink back along with some of the counter.


IMG_20210206_154908119.jpg IMG_20210206_141259721.jpg IMG_20210206_141306347.jpg IMG_20210206_141318860.jpg
 
I’m digging the reloading bench. I’ve been into hand-loading since the mid 80’s. What caught my eye is the sliding shelves for the plastic containers. That looks so organized and neat. I use similar containers but just stack them under my workbench. I’m stealing this idea. Thanks.
Thanks this setup works great for me and reloading has kept me out of this I can't find ammo mess that everyone is having..
 
Thanks this setup works great for me and reloading has kept me out of this I can't find ammo mess that everyone is having..
same here, i now find myself in the 'I can't find small pistol primers mess'. A guy on a local shooting site had offered to sell me 1000 small pistol primers for just $200. i told him I wasn't that desperate. I would pay $100, but that's really only because a lot of friends have no ammo.
I have already started planning to make some wooden slats for the plastic containers.
 
same here, i now find myself in the 'I can't find small pistol primers mess'. A guy on a local shooting site had offered to sell me 1000 small pistol primers for just $200. i told him I wasn't that desperate. I would pay $100, but that's really only because a lot of friends have no ammo.
I have already started planning to make some wooden slats for the plastic containers.
22 9mm 45acp 5.56 and 308
I'm retiring in 4 years I stocked up on supplies to reload everything x2 and will last me till I'm gone not going to say how much I have but I did the same with motorcycles we have 12.
All my money goes to my lab and stuff to fix and then sell...
 
Back
Top Bottom