• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Show me your workbench!

I see I'm not the only one using prescription canisters for small parts collection. They are the new version of baby food jars.

BTW, that is a very old tube. I am so old I actually remember radios using those tubes. The octal sockets then became the great new thing :-)
 
Here's my humble shop - about 1/3 of a 10x14 stick-built aluminum shed, or about 50-60 sq. ft.

i-LcHTjgX-L.jpg
 
Very nice.
That's what great about this hobby. It doesn't take up much room.
You even have room for some fun collectibles.
Although I'm worried about the easy to reach staple guns. Frustration can be tamed. :)
 
Your correct, probably fairly common equipment on this forum....there is also an old Knight Oscilloscope under the bench the still works, but the view area is so small it’s difficult for me to see.

Regards,
Andy
 
Your correct, probably fairly common equipment on this forum....there is also an old Knight Oscilloscope under the bench the still works, but the view area is so small it’s difficult for me to see.

Regards,
Andy

OT - The 465B has been a favourite of mine since the 70s. Now they are sold for about 100 dollars a piece. I admit to having three. Please don't let my addiction to this scope be public knowledge :-) I have repaired them and they are not easily repaired. I have a couple of the 2000 scopes series. They are flat and wide. There is a single pcb inside and they are easily repaired. Raytheon bought me my first 465B. I was truly thrilled. I believe it was nearly 3000 grand in 70s money. BTW 100 dollars translates into 22 dollars in 1976 money. I have a digital scope but am prejudiced against it. It does not have a nice smooth trace. I realize that this does not detract from troubleshooting. I just don't like seeing the little steps in the sine wave. However, I own it because when troubleshooting something simple like an audio amplifier, it shows the DC voltage, period, peak to peak voltage and frequency of a signal in a little side bar. Information all at once. These incredibly useful items like the 465B for doing bench work are now being sold for peanuts because almost no one does electronic repair. I am not counting replacing whole pcbs as doing repair. BTW, I owned that Dynaco preamp and the power amp for many years. I recognized it immediately. And yes, I am quite old.
 
OT - The 465B has been a favourite of mine since the 70s. Now they are sold for about 100 dollars a piece. I admit to having three. Please don't let my addiction to this scope be public knowledge :) I have repaired them and they are not easily repaired. I have a couple of the 2000 scopes series. They are flat and wide. There is a single pcb inside and they are easily repaired. Raytheon bought me my first 465B. I was truly thrilled. I believe it was nearly 3000 grand in 70s money. BTW 100 dollars translates into 22 dollars in 1976 money. I have a digital scope but am prejudiced against it. It does not have a nice smooth trace. I realize that this does not detract from troubleshooting. I just don't like seeing the little steps in the sine wave. However, I own it because when troubleshooting something simple like an audio amplifier, it shows the DC voltage, period, peak to peak voltage and frequency of a signal in a little side bar. Information all at once. These incredibly useful items like the 465B for doing bench work are now being sold for peanuts because almost no one does electronic repair. I am not counting replacing whole pcbs as doing repair. BTW, I owned that Dynaco preamp and the power amp for many years. I recognized it immediately. And yes, I am quite old.

Raytheon heh, almost went to work for them in the late 90s....in another life I was a HAWK Officer then was a Patriot Battery Commander during Desert Storm.

Have a few PAS boxes in various configurations, if one looks closely, there is also an FM-1 and a ST-70 in the photo. Working on that PAS, someone had butchered it up, it’s a mess inside, but somewhat original. The FM-1 and the ST 70 make up my shop system.

I’m also very fond of the 465B, thankful to have it.

Andy
 
Have you noticed the LED lights interfering with the RF on your bench? I have on mine.
 
Have you noticed the LED lights interfering with the RF on your bench? I have on mine.

I intend to be careful about this. I have already learned I have to turn off my fluorescent shop light to eliminate noise into a sensitive receiver. That light even produced noise into a Tek scope I had apart and was repairing. That noise drove me crazy until I realized it was the light. Probably will have to do the same with an LED shop light I have added for additional lighting. Old eyes sigh.....
 
Everything messes up the AM band, some lighting messes up the FM band. I have a nice magnifier light that totally wipes out AM and FM when turned on, someday I may take it apart and see if I can do something about it.

Tom
 
Back
Top Bottom