• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Show us your Technics stuff

Here's my standard SL-MA1 with T4P cartridge and factory finish. Cart is a Technics P540.

DSCF0138.jpg
 
I swore I was not going to buy anymore Technics. Not that I don`t like them, I do like them its just I have had a bit of a hankering to try some Sansui.
Anyway you don`t see TOTL equipment like this around here, at least not in my price range. The cheap price is due to its non working. All the lights come on but nothing else happens.
Shall be interesting to see if I can find out the problem and my be even get it going.





Tony

Hi Tony,
I saw that one on gumtree and well it was gone by the time i tried to contract a friend in WA. Anyway, clean out the dust, and i used CRC-2-26 spray on the white boxes, that the cable goes to, as, i bought a V9 from Germany, and one channel was dead, and my friend sugguested the controls needed cleaning, esp the white input boxes. Terminals, can get nice aftermarket ones, either Jaycar or something like that.

Great buy, very nice condition, with door intact etc :banana: Awesome !!!!!!!!!!!! Phonostage, very very good in the V9
 
Last edited:
Hi Tony,
I saw that one on gumtree and well it was gone by the time i tried to contract a friend in WA. Anyway, clean out the dust, and i used CRC-2-26 spray on the white boxes, that the cable goes to, as, i bought a V9 from Germany, and one channel was dead, and my friend sugguested the controls needed cleaning, esp the white input boxes. Terminals, can get nice aftermarket ones, either Jaycar or something like that.

Great buy, very nice condition, with door intact etc :banana: Awesome !!!!!!!!!!!! Phonostage, very very good in the V9

Hi, Synchro-bias,
Lucky you missed out.

The door is not quite intact, chip in one corner but that is the least of the problems.

I will start a separate thread on this soon as I am going to need a lot of help to get this one going.

I am waaayyyyy out of my depth here.


Tony
 
Latest acquisition, first one I ever saw in Holland, it was advertised for maybe ten minutes :).

tumblr_nbc4heQdf11te98fao1_1280.jpg


(Picture is from the advertisement, it will be shipped tomorrow).
 
Bought this one too, it came yesterday;

tumblr_nbce9nAmI61te98fao1_1280.jpg


tumblr_nbce9nAmI61te98fao2_1280.jpg


It wasn't expensive, since broken. I investigated it this morning and it seems this is the culprit

tumblr_nbdu97bqmp1te98fao1_1280.jpg


Now that Technics is back in business perhaps we'll get new parts too!!!

Well, that's a dream never to come true, but I will put in another rectifier. This amp has a damping factor of 100, that's a lot, I wonder how it will sound.
 
^ Very nice Technics SU-3500 integrated above. I've owned one for quite a few years. Surprisingly,for a Technics amp.. it has a nice warm sound to it.. plenty of bass too!
Also,likes the volume lock pre-set ring.. something you don't see too often.
 
Nice thing indeed! Damping factor of 100… my SU-7300 has one of 20, the 7700 of 25. I don't care about these figures (damping factors are not relevant due to the loudspeakers' crossovers anyway), but it still is interesting to see this.

The volume pre-set ring is something seen in Technics models until 1975 (in fact, the SU-3500 is the last to offer this feature). The 3500 further has some nice twists like prolonged selector switch bar to keep signal parts short, pre out and main in connectors, and an adjustable phono stage. Other things are not my favourite like the channel-separated tone control.



Btw.: I highly doubt Technics will re-offer replacement parts for models before to date. Of course it would be nice, but the costs would just be too high.
 
^ Very nice Technics SU-3500 integrated above. I've owned one for quite a few years. Surprisingly,for a Technics amp.. it has a nice warm sound to it.. plenty of bass too!
Also,likes the volume lock pre-set ring.. something you don't see too often.

Yes, I was wondering if indeed the older Technics amps would sound like or near let's say a Marantz 1060 or any of the old Sansui or Luxman amps (I restored a Sansui AU-666 and a Luxman SQ-507x and these sound marvelous).
 
Nice thing indeed! Damping factor of 100… my SU-7300 has one of 20, the 7700 of 25. I don't care about these figures (damping factors are not relevant due to the loudspeakers' crossovers anyway), but it still is interesting to see this.

The volume pre-set ring is something seen in Technics models until 1975 (in fact, the SU-3500 is the last to offer this feature). The 3500 further has some nice twists like prolonged selector switch bar to keep signal parts short, pre out and main in connectors, and an adjustable phono stage. Other things are not my favourite like the channel-separated tone control.



Btw.: I highly doubt Technics will re-offer replacement parts for models before to date. Of course it would be nice, but the costs would just be too high.

The damping factor still plays a role for the low frequencies as far as I know and that also is where it comes in most handy. I'm not sure if the crossover has much influence on the bass driver, no need to put resistors in that stage I can imagine, but I need to admit that my knowledge about the subject needs to be improved. Where it will make a real difference I think is when bi-amping. And I guess this SU-3500 is quite well suited for bi-amping purposes. I'd need to dive a little deeper into it and I probably will, but I need to move house first, it will take some months before I can actually start these kinds of experiments.

I know Technics will not re-offer replacement parts, I think Matsushita/Panasonic never really cared for this after sales aspect. I regard it as strange, but why does there need to be a site like the vintage knob, while a company like Panasonic has a heritage they can be proud of, but they don't seem to care about it really? Maybe it will come one day, at least Technics still belongs to its original owner.
 
This one was still lurking in the back of my car. Cheap little amp, I did not expect much from it, but nice to have in the collection.

Boy, was I mistaken, this thing really is the surprise of the century. What an amazing sound, musically absolutely on par with the Sansui AU-666, Luxman SQ-507x or Marantz 1060, if not better.

Not much power, but who needs it when one's hearing angels sing (Harmonium's "Si on avait besoin d'une cinquième saison" to be exactly). Absolutely a "Geheimtipp" like my Geman neighbours would say.

So Technics also could do it....

tumblr_nbf90zEiFy1te98fao2_1280.jpg


tumblr_nbf90zEiFy1te98fao1_1280.jpg


tumblr_nbf90zEiFy1te98fao3_1280.jpg
 
Theh, was just watching that one on 'marktplaats'. Congrats with the buy. I had one before I found my sa800, very nice receiver!

It arrived this afternoon. As you have probably read at MP the seller said it was his surprise for 2014. It indeed sounds really great. What's your experience with the 600 and the 600 compared to the 800?
 
Hi, Synchro-bias,
Lucky you missed out.

The door is not quite intact, chip in one corner but that is the least of the problems.

I will start a separate thread on this soon as I am going to need a lot of help to get this one going.

I am waaayyyyy out of my depth here.


Tony

Hi Tony,
Good idea, get a thread going, but one thing I would be doing is cleaning the controls, i found the CRC-2-26 helped me, my V9 needs a clean again, so maybe not all the dust is out of the white control boxes . All I can think to do is cleaning the controls, and terminals, easy to get, have the old V9 terminals of mine, i ended up upgrading mine
 
It arrived this afternoon. As you have probably read at MP the seller said it was his surprise for 2014. It indeed sounds really great. What's your experience with the 600 and the 600 compared to the 800?

It's difficult to compare cause my 600 was hooked to a pair of sb6000 and my 800 to the sb7000. I remember I was also really surprised the first time I heard the 600 play.

However the sa800 is a lot bigger and heavier, and you know what they say :)

We are trying to collect all of the sa serie but we still miss one... :tears:

Hint: it's not the sa200 which is missing on the picture

DSC_0049_zpsd49f51e1.jpg
 
One enigma solved, a new one found.

I wondered what the country code "EH" in the serial number of one of my SU-8099's was, it's now clear it is "Holland". Apparently the follow up code of "XGH", which also is Holland, but for older stuff.

But, what the h... is "FLE" or "FEE" (the print is a little faded)? This 600A from a couple of pics earlier has this country code. It has a US plug too (with adapter), but on top of that a voltage selector.

tumblr_nbhbx5hRsR1te98fao1_1280.jpg
 
Back
Top Bottom