BTSs
Active Member
Hi Tony,
Good idea, get a thread going, but one thing I would be doing is cleaning the controls, i found the CRC-2-26 helped me, my V9 needs a clean again, so maybe not all the dust is out of the white control boxes . All I can think to do is cleaning the controls, and terminals, easy to get, have the old V9 terminals of mine, i ended up upgrading mine
Shall be back on to the V9 soon.
I accidently dragged a test probe across the main board while testing some voltages. Blue flash and now the lights don`t work now. I was a bit pi@@#d off so I put it back on the shelf.

I`ve also just picked up this and its been an easy fix. Couple of new belts and its working again.

Been sitting here mesmerised by all the lights and sliding draws.
Tony




















